Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SMC
	Maximum Suction Flow	29L/min
	Product Type	Vacuum Generator
	Maximum Vacuum Pressure	-91kPa
	Nozzle Diameter	0.7mm
	Series	ZK2
	Silencer	Yes
	Maximum Supply Pressure	0.6MPa
	Vacuum Port Size	8 mm
	Minimum Operating Temperature	+5°C
	Maximum Operating Temperature	+50°C
	Standards/Approvals	CE, UKCA, IEC 61131-9
	Better World Product	Yes
	Better World Claim	Saves Energy

	Sélectionner tout
	Marque SMC
	Maximum Suction Flow 29L/min
	Product Type Vacuum Generator
	Maximum Vacuum Pressure -91kPa
	Nozzle Diameter 0.7mm
	Series ZK2
	Silencer Yes
	Maximum Supply Pressure 0.6MPa
	Vacuum Port Size 8 mm
	Minimum Operating Temperature +5°C
	Maximum Operating Temperature +50°C
	Standards/Approvals CE, UKCA, IEC 61131-9
	Better World Product Yes
	Better World Claim Saves Energy

Pays d'origine :: JP

SMC ZK2 Series Vacuum Generator, 29L/min Maximum Suction Flow, -91kPa Maximum Vacuum Pressure - ZK2A07K5RWA-08

This vacuum generator provides Compact pneumatic suction for automation and handling tasks in industrial settings. It functions as an air-driven ejector that produces negative pressure to pick up, hold or transfer components within production lines while incorporating noise reduction for quieter operation.

Features & Benefits

• Maximum supply pressure 0.6 MPa for robust pneumatic drive
• Peak suction capability of -91 kPa to handle strong holds
• Maximum suction flow 29 L/min enabling moderate throughput
• Nozzle diameter 0.7mm for focused vacuum generation
• Vacuum port size 8mm for straightforward piping connections
• Operates between 5 °C and 50 °C for typical factory environments

Applications

• Suitable for pick-and-place of electronic components in SMT processes
• Ideal for small-part transfer in mechanical assembly lines
• Used for part hold-down during inspection and test stations
• Can be used for material handling on automated conveyors

How does it perform when integrated into a Compact end-of-arm tool?

Its small nozzle and moderate flow allow concentrated suction at gripping points while the 8mm port simplifies connection to short tubing runs.

What environmental limits should operators observe?

The unit is designed for ambient temperatures from 5 °C to 50 °C and should be installed where conditions remain within this range.

How does the silencing feature impact installation near workstations?

The integrated silencer reduces exhaust noise, permitting closer placement to operators and inspection areas without introducing additional mufflers.

What supply conditions are required for consistent operation?

A regulated compressed Air source up to 0.6 MPa is necessary to maintain the specified suction and flow performance.

SMC Vacuum Generator, 0.7 mm nozzle, -91 kPa 29 L/min, ZK2 series

Frais de livraison offerts pour toute commande de plus de 90,00 €