Infineon CY7C65620-56LTXC, Controller IC 480 Mbps, 3.45 V, USB, 3.15 V, 56-Pin VQFN
- N° de stock RS:
- 273-2649
- Référence fabricant:
- CY7C65620-56LTXC
- Fabricant:
- Infineon
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 273-2649
- Référence fabricant:
- CY7C65620-56LTXC
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Maximum Data Rate | 480Mbps | |
| Product Type | Controller IC | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.15V | |
| Maximum Supply Voltage | 3.45V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 56 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | USB 2.0 specification | |
| Width | 8 mm | |
| Series | CY7C65620 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Maximum Data Rate 480Mbps | ||
Product Type Controller IC | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.15V | ||
Maximum Supply Voltage 3.45V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 56 | ||
Supported Protocols USB | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals USB 2.0 specification | ||
Width 8 mm | ||
Series CY7C65620 | ||
Automotive Standard No | ||
The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification.
Bus power configurations
Space saving 56 pin QFN
In system EEPROM programming
Integrated port status indicator control
Up to four downstream ports supported
Liens connexes
- Infineon CY7C65620-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C65630-56LTXC USB 2.0 56-Pin QFN
- Infineon CY7C65631-56LTXC USB 2.0 56-Pin QFN
- Infineon CY7C65630-56LTXCT USB 2.0 56-Pin QFN
- Infineon CY7C65630-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C65631-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C64215-56LTXC 12Mbps 5.25 V, 56-Pin QFN
- Infineon CY7C65621-56LTXI USB 2.0 56-Pin QFN
