ROHM BD93E11GWL-E2, USB Controller, 22V, USB, 3.67 V UCSP50L2
- N° de stock RS:
- 240-3983
- Référence fabricant:
- BD93E11GWL-E2
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 240-3983
- Référence fabricant:
- BD93E11GWL-E2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | USB Controller | |
| USB Specification | USB Type C | |
| Power Supply Type | Single | |
| ESD Protection | No | |
| Maximum Supply Voltage | 22V | |
| Minimum Supply Voltage | 3.67V | |
| Mount Type | PCB | |
| Package Type | UCSP50L2 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 2.63mm | |
| Height | 570μm | |
| Standards/Approvals | IEC 61000-4-2, RoHS | |
| Automotive Standard | AEC-Q101 | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type USB Controller | ||
USB Specification USB Type C | ||
Power Supply Type Single | ||
ESD Protection No | ||
Maximum Supply Voltage 22V | ||
Minimum Supply Voltage 3.67V | ||
Mount Type PCB | ||
Package Type UCSP50L2 | ||
Supported Protocols USB | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Length 2.63mm | ||
Height 570μm | ||
Standards/Approvals IEC 61000-4-2, RoHS | ||
Automotive Standard AEC-Q101 | ||
The ROHM USB Type-C power delivery controller supports USB PD using base-band communication. It is compatible with USB Type-C Specification and Power Delivery specification. It includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP and SOP signalling allowing it to communicate with cable marker ICs.
32 Bit ARM® Cortex®-M0 processor embedded
USB Type-C specification release 1.3 compatible
USB PD specification revision 3.0 compatible
Integrated VCONN switches
Integrated VBUS N-ch MOSFET switch gate driver
Integrated VBUS discharge switch
Supports dead battery operation
I2C interface for host communication
Liens connexes
- ROHM BD93F10MWV-E2 22V 3.67 V UCSP50L2
- ROHM Stand Alone PD Controller for Sink BD93E11GWL EVK Evaluation Kit for BD93E11GWL for Type-C Cable for Evaluation
- ROHM BD93F50MWV-E2 2-Channel 10 Gbps USB-PD, -0.3 V UQFN
- STMicroelectronics 22V USB 2.0 4.1 V, 16-Pin QFN
- STMicroelectronics STUSB4710AQTR 22V I2C 4.1 V, 24-Pin QFN
- STMicroelectronics STUSB4710AQ1TR 22V USB 2.0 4.1 V, 16-Pin QFN
- STMicroelectronics STUSB4500BJR 22V I2C 3 V, 24-Pin QFN
- Infineon CYPAP212A1-14SXI 22V 14-Pin SOP-14
