onsemi, USB Controller, 1-Channel, 5.5 V, USB 2.0, 2.7 V, 25-Pin WLCSP
- N° de stock RS:
- 229-6331P
- Référence fabricant:
- FSA4485UCX
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 229-6331P
- Référence fabricant:
- FSA4485UCX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Number of Transceivers | 1 | |
| Product Type | USB Controller | |
| USB Specification | USB 2.0, USB Type C | |
| Sub Type | USB Type-C Analogue Audio Switch | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Surface | |
| Package Type | WLCSP | |
| Pin Count | 25 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | FSA4485 | |
| Standards/Approvals | No | |
| Height | 0.61mm | |
| Length | 2.19mm | |
| Supply Current | 65μA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Number of Transceivers 1 | ||
Product Type USB Controller | ||
USB Specification USB 2.0, USB Type C | ||
Sub Type USB Type-C Analogue Audio Switch | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Surface | ||
Package Type WLCSP | ||
Pin Count 25 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series FSA4485 | ||
Standards/Approvals No | ||
Height 0.61mm | ||
Length 2.19mm | ||
Supply Current 65μA | ||
Automotive Standard No | ||
The ON Semiconductor FSA4485 series is a high performance USB−C port multimedia switch to supports analog audio headsets. It allows sharing of the USB−C port to pass USB 2.0 signals, analog audio, sideband use signals, and analog microphone signal.
High voltage protection on connector side to avoid damage
Switches are protected to avoid damage
Low RDSON for minimal insertion loss
Data integrity is preserved due to high bandwidth
