FTDI Chip, USB Controller 1 Mbps, 5.5V, USB 2.0, 5.5 V, 24-Pin QFN
- N° de stock RS:
- 216-2607
- Référence fabricant:
- FT240XQ-T
- Fabricant:
- FTDI Chip
Sous-total (1 plateau de 490 unités)*
920,71 €
(TVA exclue)
1 114,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 12 mars 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le plateau* |
|---|---|---|
| 490 + | 1,879 € | 920,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 216-2607
- Référence fabricant:
- FT240XQ-T
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Product Type | USB Controller | |
| Maximum Data Rate | 1Mbps | |
| Sub Type | USB 8-bit FIFO IC | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 5.5V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 24 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 850°C | |
| Series | FT240X | |
| Standards/Approvals | USB 2.0 Full Speed capable | |
| Height | 0.9mm | |
| Length | 4mm | |
| Supply Current | 8mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Product Type USB Controller | ||
Maximum Data Rate 1Mbps | ||
Sub Type USB 8-bit FIFO IC | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 5.5V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 24 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 850°C | ||
Series FT240X | ||
Standards/Approvals USB 2.0 Full Speed capable | ||
Height 0.9mm | ||
Length 4mm | ||
Supply Current 8mA | ||
Automotive Standard No | ||
The FTDI Chip USB to parallel FIFO interface with Single chip USB to parallel FIFO bidirectional data transfer interface. Entire USB protocol handled on the chip. No USB specific firmware programming required. It has fully integrated 2048 byte multi-time-
USB 2.0 full speed compatible
-40°C to 85°C extended operating temperature range
Internal 3V3/1V8 LDO regulators
