FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- N° de stock RS:
- 146-6838P
- Référence fabricant:
- FT600Q-B-T
- Fabricant:
- FTDI Chip
Offre groupée disponible
Sous-total 10 unités (conditionné en plateau)*
62,10 €
(TVA exclue)
75,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 582 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 24 | 6,21 € |
| 25 - 49 | 6,04 € |
| 50 - 99 | 5,88 € |
| 100 + | 5,74 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 146-6838P
- Référence fabricant:
- FT600Q-B-T
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Number of Transceivers | 2 | |
| Product Type | USB Bridge IC | |
| Maximum Data Rate | 5Gbps | |
| USB Specification | USB 2.0, USB 3.0 | |
| Sub Type | Transceiver | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Series | FT600Q | |
| Standards/Approvals | RoHS | |
| Length | 7.1mm | |
| Height | 0.69mm | |
| Width | 7.1 mm | |
| Automotive Standard | No | |
| Supply Current | 70mA | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Number of Transceivers 2 | ||
Product Type USB Bridge IC | ||
Maximum Data Rate 5Gbps | ||
USB Specification USB 2.0, USB 3.0 | ||
Sub Type Transceiver | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 56 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Series FT600Q | ||
Standards/Approvals RoHS | ||
Length 7.1mm | ||
Height 0.69mm | ||
Width 7.1 mm | ||
Automotive Standard No | ||
Supply Current 70mA | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Liens connexes
- FTDI Chip FT600Q-B-T 2-Channel 5Gbit/s USB 3.0 56-Pin QFN
- FTDI Chip FT601Q-B-T 2-Channel 5Gbit/s USB 3.0 76-Pin QFN
- FTDI Chip FT232HPQ-TRAY 12Mbps 3.3 V, 56-Pin QFN 56
- FTDI Chip FT240XQ-T USB 2.0 24-Pin QFN
- FTDI Chip FT231XQ-T USB 2.0 20-Pin QFN
- FTDI Chip FT602Q-B-T 480Mbps 3.3 V, 76-Pin QFN
- FTDI Chip FT312D-32Q1C-T 3.3 V, 32-Pin QFN
- FTDI Chip FTDI USB-KEY