onsemi, Controller IC 5 Gbps, 5.5 V, USB, 2.8 V, 14-Pin MLP
- N° de stock RS:
- 146-4429
- Référence fabricant:
- FUSB302MPX
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 146-4429
- Référence fabricant:
- FUSB302MPX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Maximum Data Rate | 5Gbps | |
| Product Type | Controller IC | |
| USB Specification | USB Type C | |
| Sub Type | Controller | |
| Power Supply Type | Dual | |
| ESD Protection | No | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 2.8V | |
| Mount Type | Surface | |
| Package Type | MLP | |
| Pin Count | 14 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB | |
| Dual Supply Voltage | 5V | |
| Maximum Operating Temperature | 85°C | |
| Width | 2.5 mm | |
| Series | FUSB302 | |
| Standards/Approvals | No | |
| Height | 0.73mm | |
| Length | 2.5mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Maximum Data Rate 5Gbps | ||
Product Type Controller IC | ||
USB Specification USB Type C | ||
Sub Type Controller | ||
Power Supply Type Dual | ||
ESD Protection No | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 2.8V | ||
Mount Type Surface | ||
Package Type MLP | ||
Pin Count 14 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB | ||
Dual Supply Voltage 5V | ||
Maximum Operating Temperature 85°C | ||
Width 2.5 mm | ||
Series FUSB302 | ||
Standards/Approvals No | ||
Height 0.73mm | ||
Length 2.5mm | ||
Automotive Standard No | ||
The FUSB302 targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability.The FUSB302 enables the USB Type-C detection including attach, and orientation. The FUSB302 integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD Block enables full support for alternative interfaces of the Type-C specification.
Current Capability Indication as Host
Current Capability Detection as Device
Audio Adapter Accessory Mode
Debug Accessory Mode
Active Cable Detection
Liens connexes
- onsemi FUSB302MPX 5.5 V 2.8 V, 14-Pin MLP
- onsemi 5.5 V 2.7 V, 14-Pin MLP
- onsemi FUSB302BMPX 5.5 V 2.7 V, 14-Pin MLP
- ROHM BD93F50MWV-E2 2-Channel 10 Gbps USB-PD, -0.3 V UQFN
- Infineon 3.6 V 1.2 V, 121-Pin BGA
- FTDI Chip 2-Channel 5 Gbps USB 3.0 3.3 V, 56-Pin QFN
- FTDI Chip 2-Channel 5 Gbps USB 3.0 3.3 V, 76-Pin QFN
- Infineon CYUSB3012-BZXC 3.6 V 1.2 V, 121-Pin BGA
