onsemi, Controller IC 5 Gbps, 5.5V, USB, 2.7 V, 14-Pin MLP
- N° de stock RS:
- 146-4426
- Référence fabricant:
- FUSB302BMPX
- Fabricant:
- onsemi
Sous-total (1 bobine de 3000 unités)*
1 476,00 €
(TVA exclue)
1 785,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 20 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,492 € | 1 476,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 146-4426
- Référence fabricant:
- FUSB302BMPX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Maximum Data Rate | 5Gbps | |
| Product Type | Controller IC | |
| USB Specification | USB Type C | |
| Sub Type | Controller | |
| Power Supply Type | Dual | |
| ESD Protection | No | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Surface | |
| Package Type | MLP | |
| Pin Count | 14 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | -40°C | |
| Dual Supply Voltage | 5V | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Length | 2.5mm | |
| Height | 0.73mm | |
| Series | FUSB302B | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Maximum Data Rate 5Gbps | ||
Product Type Controller IC | ||
USB Specification USB Type C | ||
Sub Type Controller | ||
Power Supply Type Dual | ||
ESD Protection No | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Surface | ||
Package Type MLP | ||
Pin Count 14 | ||
Supported Protocols USB | ||
Minimum Operating Temperature -40°C | ||
Dual Supply Voltage 5V | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Length 2.5mm | ||
Height 0.73mm | ||
Series FUSB302B | ||
Automotive Standard AEC-Q100 | ||
The FUSB302B targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability. The FUSB302B enables the USB Type-C detection including attach, and orientation. The FUSB302B integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD Block enables full support for alternative interfaces of the Type-C specification.
Dual-Role Functionality with Autonomous DRP Toggle
Ability to connect as either a host or a device based on what has been attached.
Software configurable either as a dedicated host, dedicated device, or dual role.
Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.