FTDI Chip UART RS232, RS422, RS485, SIE, UART 16-Pin QFN, FT230XQ-R
- N° de stock RS:
- 923-1597
- Référence fabricant:
- FT230XQ-R
- Fabricant:
- FTDI Chip
Voir l’ensemble des UART
Article en cours d'approvisionnement. Merci de bien vouloir nous contacter.
Prix Each (On a Reel of 5000)
2,182 €
(TVA exclue)
2,64 €
(TVA incluse)
Unité | Prix par unité | la bobine* |
5000 + | 2,182 € | 10.910,00 € |
*prix conseillé |
- N° de stock RS:
- 923-1597
- Référence fabricant:
- FT230XQ-R
- Fabricant:
- FTDI Chip
- Pays d'origine :
- TW
Documentation technique
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
Spécifications
Attribut | Valeur |
Number of Channels per Chip | 1 |
Standard Supported | RS232, RS422, RS485, SIE, UART |
Transmit FIFO | 512B |
Receive FIFO | 512B |
Maximum Data Rate | 3MBd |
Transmitter and Receiver FIFO Counter | Yes |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 16 |
Typical Operating Supply Voltage | 5 V |
Dimensions | 4 x 4 x 0.75mm |
Minimum Operating Temperature | -40 °C |
Maximum Operating Temperature | +85 °C |