ideal-tek 130mm Stainless Steel, Polyetheretherketone Flat ESD Safe Tweezer
- N° de stock RS:
- 136-7366
- Numéro d'article Distrelec:
- 301-01-864
- Référence fabricant:
- 4WFCPR.SA.1
- Fabricant:
- ideal-tek
Sous-total (1 unité)*
45,22 €
(TVA exclue)
54,72 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 58 unité(s) prête(s) à être expédiée(s)
- Plus 24 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 45,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 136-7366
- Numéro d'article Distrelec:
- 301-01-864
- Référence fabricant:
- 4WFCPR.SA.1
- Fabricant:
- ideal-tek
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ideal-tek | |
| Product Type | Tweezer | |
| Material | Stainless Steel, Polyetheretherketone | |
| Overall Length | 130mm | |
| Point Type | Flat | |
| Anti-Magnetic | Yes | |
| ESD Safe | Yes | |
| Number of Pieces | 1 | |
| Anti-Acid | Yes | |
| Overall Width | 12mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ideal-tek | ||
Product Type Tweezer | ||
Material Stainless Steel, Polyetheretherketone | ||
Overall Length 130mm | ||
Point Type Flat | ||
Anti-Magnetic Yes | ||
ESD Safe Yes | ||
Number of Pieces 1 | ||
Anti-Acid Yes | ||
Overall Width 12mm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- CH
Idealtek ESD Carbon Peek Replaceable Tips Tweezers
Idealtek offers the most precise and comprehensive plastic tweezer range brought together from over 20 years experience engineering plastic materials. This range offers durable anti-magnetic, anti-acid stainless steel with ESD safe replaceable carbofib tips.
Typical applications include use in the electronic industry, watch-makers, jewellers and laboratory and medical applications in moderately aggressive chemical environments.
Replaceable kits come with 2 tips and 3 screws
The easiest and most precise replacement system available into the tweezers market
Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum
Good corrosion resistance to most chemicals, salts and acids
Non-magnetisable
Generally used where corrosion resistance and toughness are primary requirements
General Notes on the Stainless Steel (SA) Body
PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre
Heat stabilised
Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance
Low friction, self-lubricating properties, excellent wear and abrasion resistance
Good heat capability
Good chemical resistance (oils, grease, fuels, non-polar solvents)
ESD safe material
Typical applications include handling of sensitive components and devices
General Notes on the Plastic Carbofib (CF) Replaceable Tips
Liens connexes
- ideal-tek 130mm Polyetheretherketone Curved ESD Safe Tweezer
- ideal-tek 130mm Stainless Steel Round Flat ESD Safe Tweezer
- ideal-tek 130mm Carbon Fibre Stainless Steel Fine ESD Safe Tweezer
- ideal-tek 130mm Polyetheretherketone Fine, Pointed ESD Safe Tweezer
- ideal-tek 130mm Stainless Steel Polyetheretherketone Fine Flat, Round ESD Safe Tweezer
- ideal-tek 40mm Polyetheretherketone Flat, Rounded ESD Safe Tweezer Tips
- ideal-tek 130mm Polyetheretherketone Curved, Very Fine ESD Safe Tweezer
- ideal-tek 130mm Polyetheretherketone Straight Strong ESD Safe Tweezer