Vishay SMA6F60A-M3/H 1-Element Uni-Directional, Uni-Directional TVS Diode, 600 W, 2-Pin DO-221AC
- N° de stock RS:
- 233-0949
- Référence fabricant:
- SMA6F60A-M3/H
- Fabricant:
- Vishay
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 233-0949
- Référence fabricant:
- SMA6F60A-M3/H
- Fabricant:
- Vishay
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Vishay | |
| Number of Elements per Chip | 1 | |
| Direction Type | Uni-Directional, Uni-Directional | |
| Product Type | TVS Diode | |
| Peak Pulse Power Dissipation (Pppm) | 600 W | |
| Pin Count | 2 | |
| Package Type | DO-221AC | |
| Automotive Standard | No | |
| Clamping Voltage (VC) | 96.8 V | |
| Diode Configuration | Single | |
| ESD Protection | Yes | |
| Height | 1 mm | |
| Length | 4.35 mm | |
| Maximum Operating Temperature | 175 °C | |
| Maximum Peak Pulse Current (Ippm) | 31.9 A | |
| Maximum Reverse Leakage Current | 1 μA | |
| Maximum Reverse Stand-off Voltage (Vwm) | 60 V | |
| Minimum Breakdown Voltage (Vbr) | 66.7 V | |
| Minimum Operating Temperature | -55 °C | |
| Mount Type | Surface | |
| Series | eSMP | |
| Standards/Approvals | No | |
| Test Current (It) | 1 mA | |
| Width | 2.7 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Vishay | ||
Number of Elements per Chip 1 | ||
Direction Type Uni-Directional, Uni-Directional | ||
Product Type TVS Diode | ||
Peak Pulse Power Dissipation (Pppm) 600 W | ||
Pin Count 2 | ||
Package Type DO-221AC | ||
Automotive Standard No | ||
Clamping Voltage (VC) 96.8 V | ||
Diode Configuration Single | ||
ESD Protection Yes | ||
Height 1 mm | ||
Length 4.35 mm | ||
Maximum Operating Temperature 175 °C | ||
Maximum Peak Pulse Current (Ippm) 31.9 A | ||
Maximum Reverse Leakage Current 1 μA | ||
Maximum Reverse Stand-off Voltage (Vwm) 60 V | ||
Minimum Breakdown Voltage (Vbr) 66.7 V | ||
Minimum Operating Temperature -55 °C | ||
Mount Type Surface | ||
Series eSMP | ||
Standards/Approvals No | ||
Test Current (It) 1 mA | ||
Width 2.7 mm | ||
The Vishay transient voltage suppressor comes in very low profile (typical height of 0.95 mm) and Ideal for automated placement. It has 600W Peak Pulse power and 60V stand-off voltage. It meets MSL level 1, per J-STD-020, LF maximum Peak of 260 °C. It is used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.
Excellent clamping capability
Uni-directional polarity
Liens connexes
- Vishay SMA6F60A-M3/H 1-Element Uni-Directional 600 W, 2-Pin DO-221AC
- Vishay VTVS15ASMF-M3-08 1-Element Uni-Directional TVS Diode 2-Pin DO-219
- Vishay SMA6F28A-M3/H 1-Element Uni-Directional TVS Diode 2-Pin DO-221
- Vishay SMA6F75A-M3/H 1-Element Uni-Directional TVS Diode 2-Pin DO-221
- Vishay SMA6F40A-M3/H 1-Element Uni-Directional TVS Diode 2-Pin DO-221
- Vishay SMA6F6.0A-M3/6A 1-Element Uni-Directional TVS Diode 2-Pin DO-221
- Vishay SMA6F18A-M3/6A 1-Element Uni-Directional TVS Diode 2-Pin DO-221
- Vishay SMA6F100A-M3/H 1-Element Uni-Directional TVS Diode 2-Pin DO-221