onsemi 5-Element Uni-Directional ESD Protection Array, 100 W, 6-Pin SC-88
- N° de stock RS:
- 186-9133
- Référence fabricant:
- SMF05CT2G
- Fabricant:
- onsemi
Sous-total (1 bobine de 3000 unités)*
300,00 €
(TVA exclue)
360,00 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,10 € | 300,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 186-9133
- Référence fabricant:
- SMF05CT2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Direction Type | Uni-Directional | |
| Product Type | ESD Protection Array | |
| Diode Configuration | Array | |
| Minimum Breakdown Voltage Vbr | 6.2V | |
| Mount Type | Surface | |
| Package Type | SC-88 | |
| Maximum Reverse Stand-off Voltage Vwm | 15V | |
| Pin Count | 6 | |
| Peak Pulse Power Dissipation Pppm | 100W | |
| Test Current It | 1mA | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Clamping Voltage VC | 12.5V | |
| Maximum Peak Pulse Current Ippm | 8A | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 5 | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Length | 2.2mm | |
| Width | 1.35mm | |
| Maximum Reverse Leakage Current | 5μA | |
| Automotive Standard | AEC-Q101 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Direction Type Uni-Directional | ||
Product Type ESD Protection Array | ||
Diode Configuration Array | ||
Minimum Breakdown Voltage Vbr 6.2V | ||
Mount Type Surface | ||
Package Type SC-88 | ||
Maximum Reverse Stand-off Voltage Vwm 15V | ||
Pin Count 6 | ||
Peak Pulse Power Dissipation Pppm 100W | ||
Test Current It 1mA | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Clamping Voltage VC 12.5V | ||
Maximum Peak Pulse Current Ippm 8A | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 5 | ||
Standards/Approvals No | ||
Height 1mm | ||
Length 2.2mm | ||
Width 1.35mm | ||
Maximum Reverse Leakage Current 5μA | ||
Automotive Standard AEC-Q101 | ||
This 5-line surge suppressor array is designed for application requiring ESD and surge protection capability. It is intended for use in over-transient voltage and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common cathode design which protects five independent lines in a single SC-88 package.
Protects up to 5 Lines in a Single SC-88 Package
Peak Power Dissipation - 100W (8x20 μ Waveform)
PPAP capable
SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements
Applications
Hand Held Portable Applications
Networking and Telecom
Automotive Electronics
Serial and Parallel Ports
Notebooks, Desktops, and Servers
Liens connexes
- onsemi SMF05CT2G 5-Element Uni-Directional ESD Protection Array 6-Pin SC-88
- onsemi 2-Element Uni-Directional ESD Protection Diode, 6-Pin SC-88
- onsemi SZESD1L001W1T2G 2-Element Uni-Directional ESD Protection Diode, 6-Pin SC-88
- onsemi 13-Element Uni-Directional ESD Protection Array 6-Pin SC-74
- onsemi CM1293A-04SO 13-Element Uni-Directional ESD Protection Array 6-Pin SC-74
- onsemi 5-Element Uni-Directional ESD Protection Array, 10-Pin UDFN
- onsemi 8-Element Uni-Directional ESD Protection Array, 14-Pin UDFN
- onsemi ESD8008MUTAG 8-Element Uni-Directional ESD Protection Array, 14-Pin UDFN