STMicroelectronics ESDA8P30-1T2 1-Element Uni-Directional ESD Protection Array, 300 W, 2-Pin SOD-882
- N° de stock RS:
- 175-1755
- Référence fabricant:
- ESDA8P30-1T2
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 175-1755
- Référence fabricant:
- ESDA8P30-1T2
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Diode Configuration | Single | |
| Product Type | ESD Protection Array | |
| Direction Type | Uni-Directional | |
| Minimum Breakdown Voltage Vbr | 6.9V | |
| Mount Type | Surface | |
| Package Type | SOD-882 | |
| Maximum Reverse Stand-off Voltage Vwm | 6.3V | |
| Pin Count | 2 | |
| Peak Pulse Power Dissipation Pppm | 300W | |
| Clamping Voltage VC | 12V | |
| Minimum Operating Temperature | -55°C | |
| ESD Protection | Yes | |
| Maximum Peak Pulse Current Ippm | 30A | |
| Maximum Operating Temperature | 150°C | |
| Number of Elements per Chip | 1 | |
| Height | 400μm | |
| Length | 1mm | |
| Standards/Approvals | No | |
| Width | 600μm | |
| Automotive Standard | No | |
| Maximum Reverse Leakage Current | 300nA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Diode Configuration Single | ||
Product Type ESD Protection Array | ||
Direction Type Uni-Directional | ||
Minimum Breakdown Voltage Vbr 6.9V | ||
Mount Type Surface | ||
Package Type SOD-882 | ||
Maximum Reverse Stand-off Voltage Vwm 6.3V | ||
Pin Count 2 | ||
Peak Pulse Power Dissipation Pppm 300W | ||
Clamping Voltage VC 12V | ||
Minimum Operating Temperature -55°C | ||
ESD Protection Yes | ||
Maximum Peak Pulse Current Ippm 30A | ||
Maximum Operating Temperature 150°C | ||
Number of Elements per Chip 1 | ||
Height 400μm | ||
Length 1mm | ||
Standards/Approvals No | ||
Width 600μm | ||
Automotive Standard No | ||
Maximum Reverse Leakage Current 300nA | ||
- Pays d'origine :
- CN
Modern wall chargers and adapters for consumer and industrial applications take benefit of the USB Type-C™, the new slimmer connector featuring reversible plug and cable orientation, allowing designers to develop smaller, thinner and lighter products. Additionally the USB power delivery, which expands USB to deliver up to 100 W (20 V, 5 A) of power, enables more efficient and fast charging over USB. STs portfolio for USB Type C and Power Delivery is designed to cope with various hardware/software partitioning solutions in order to best match your specific application requirements and design architecture: controllers ranging from STM32 general purpose MCU to hard-coded solution to fit different use cases and power ratings can be combined with a large product portfolio of protection and filtering covering all the application needs and with highly secure solution using STSAFE secure element family for strong authentication needs.
Liens connexes
- STMicroelectronics ESDA8P30-1T2 1-Element Uni-Directional ESD Protection Array 2-Pin SOD-882
- STMicroelectronics TVS221SC-1T2 Uni-Directional TVS Diode 2-Pin SOD-882
- Nexperia PESD3V3U1UL 2-Pin SOD-882
- Nexperia PESD3V3S1UL 150 W, 2-Pin SOD-882
- Littelfuse SP3031-01ETG 1-Element Uni-Directional TVS Diode Array, 2-Pin SOD-882
- Littelfuse SP1003-01ETG 1-Element Uni-Directional TVS Diode Array, 2-Pin SOD-882
- Nexperia PESD5V0F1BL 2-Pin SOD-882
- STMicroelectronics ESDA9P25-1T2 1-Element Uni-Directional TVS Diode, 2-Pin SOD-882T
