Littelfuse SMAJ10A 1-Element Uni-Directional TVS Diode, 400 W, 2-Pin DO-214

Voir l’ensemble des TVS Diodes

Sous-total (1 bobine de 5000 unités)*

575,00 €

(TVA exclue)

695,00 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité
Prix par unité
la bobine*
5000 +0,115 €575,00 €

*Prix donné à titre indicatif

N° de stock RS:
171-9528
Référence fabricant:
SMAJ10A
Fabricant:
Littelfuse
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Littelfuse

Direction Type

Uni-Directional

Product Type

TVS Diode

Diode Configuration

Single

Minimum Breakdown Voltage Vbr

12.3V

Mount Type

Surface

Package Type

DO-214

Maximum Reverse Stand-off Voltage Vwm

10V

Pin Count

2

Peak Pulse Power Dissipation Pppm

400W

Clamping Voltage VC

17V

Maximum Peak Pulse Current Ippm

23.5A

Minimum Operating Temperature

-65°C

ESD Protection

Yes

Test Current It

1mA

Number of Elements per Chip

1

Maximum Operating Temperature

150°C

Height

2.08mm

Standards/Approvals

No

Width

2.79mm

Series

SMAJ

Length

4.6mm

Maximum Reverse Leakage Current

5μA

Automotive Standard

No

Littelfuse specializes in transient voltage suppression (TVS) diodes, which are designed to protect semiconductors from damage due to transient voltages.

Low incremental surge resistance

Unidirectional and Bidirectional polarities available

Reverse standoff voltages range from 5V to 495V

Peak power ratings from 400W to 30kW

High current protection available - 1kA, 3kA, 6kA, 10kA and 15kA

The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events

Halogen-Free

For surface mounted applications in order to optimize board space

Low profile package

Built-in strain relief

Glass passivated junction

Low Inductance

Excellent clamping capability

Repetition Rate (duty cycle): 0.01%

Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types.

Typical IR less than 1mA above 10V

High temperature soldering: 250 degrees C/10 seconds at terminals

Liens connexes