Références fabricant

Littelfuse SMDJ28A 1-Element Uni-Directional TVS Diode, 3 kW, 2-Pin DO-214

N° de stock RS:: 171-3853
Référence fabricant:: SMDJ28A
Fabricant:: Littelfuse

Littelfuse SMDJ28A 1-Element Uni-Directional TVS Diode, 3 kW, 2-Pin DO-214

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 171-3853
Référence fabricant:: SMDJ28A
Fabricant:: Littelfuse

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Littelfuse
	Diode Configuration	Single
	Direction Type	Uni-Directional
	Product Type	TVS Diode
	Minimum Breakdown Voltage Vbr	31.1V
	Mount Type	Surface
	Package Type	DO-214
	Maximum Reverse Stand-off Voltage Vwm	28V
	Pin Count	2
	Peak Pulse Power Dissipation Pppm	3kW
	Test Current It	1mA
	Minimum Operating Temperature	-65°C
	Clamping Voltage VC	45.4V
	Maximum Peak Pulse Current Ippm	66.1A
	ESD Protection	Yes
	Maximum Operating Temperature	150°C
	Number of Elements per Chip	1
	Length	7.11mm
	Series	SMDJ
	Standards/Approvals	No
	Height	2.41mm
	Width	6.22mm
	Automotive Standard	No
	Maximum Reverse Leakage Current	2μA

	Sélectionner tout
	Marque Littelfuse
	Diode Configuration Single
	Direction Type Uni-Directional
	Product Type TVS Diode
	Minimum Breakdown Voltage Vbr 31.1V
	Mount Type Surface
	Package Type DO-214
	Maximum Reverse Stand-off Voltage Vwm 28V
	Pin Count 2
	Peak Pulse Power Dissipation Pppm 3kW
	Test Current It 1mA
	Minimum Operating Temperature -65°C
	Clamping Voltage VC 45.4V
	Maximum Peak Pulse Current Ippm 66.1A
	ESD Protection Yes
	Maximum Operating Temperature 150°C
	Number of Elements per Chip 1
	Length 7.11mm
	Series SMDJ
	Standards/Approvals No
	Height 2.41mm
	Width 6.22mm
	Automotive Standard No
	Maximum Reverse Leakage Current 2μA

Pays d'origine :: TH

The SMDJ Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

For surface mounted applications in order to optimize board space

Low profile package

Typical failure mode is short from over-specified voltage or current

Built-in strain relief

Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT

Glass passivated chip junction

3000W Peak Pulse power capability at 10x1000μs waveform, repetition rate (duty cycles):0.01%

Fast response time: typically less than 1.0ps from 0V to BV min

Excellent clamping capability

Low incremental surge resistance

Typical IR less than 2μA above 12V

High temperature soldering guaranteed: 260°C/40 seconds at terminals

Plastic package has underwriters laboratory flammability 94V-O

Matte tin lead–free plated

Halogen free

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.