STMicroelectronics ESDA15P60-1U1M 1-Element Uni-Directional TVS Diode, 1200 W, 2-Pin QFN
- N° de stock RS:
- 163-9753P
- Référence fabricant:
- ESDA15P60-1U1M
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 163-9753P
- Référence fabricant:
- ESDA15P60-1U1M
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | TVS Diode | |
| Diode Configuration | Array | |
| Direction Type | Uni-Directional | |
| Minimum Breakdown Voltage Vbr | 13.6V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Maximum Reverse Stand-off Voltage Vwm | 13.2V | |
| Pin Count | 2 | |
| Peak Pulse Power Dissipation Pppm | 1200W | |
| Clamping Voltage VC | 22.7V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -55°C | |
| Maximum Peak Pulse Current Ippm | 57A | |
| Number of Elements per Chip | 1 | |
| Maximum Operating Temperature | 150°C | |
| Width | 1mm | |
| Length | 1.6mm | |
| Height | 0.55mm | |
| Maximum Reverse Leakage Current | 50nA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type TVS Diode | ||
Diode Configuration Array | ||
Direction Type Uni-Directional | ||
Minimum Breakdown Voltage Vbr 13.6V | ||
Mount Type Surface | ||
Package Type QFN | ||
Maximum Reverse Stand-off Voltage Vwm 13.2V | ||
Pin Count 2 | ||
Peak Pulse Power Dissipation Pppm 1200W | ||
Clamping Voltage VC 22.7V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -55°C | ||
Maximum Peak Pulse Current Ippm 57A | ||
Number of Elements per Chip 1 | ||
Maximum Operating Temperature 150°C | ||
Width 1mm | ||
Length 1.6mm | ||
Height 0.55mm | ||
Maximum Reverse Leakage Current 50nA | ||
ST’s power-line overvoltage protection devices support applications such as satellite boxes (LNB), high power DC-DC converters, and telecom power rails. The ITA series is optimized for industrial applications, the SLVU and PEP01 for Ethernet or PoE, the STIEC45 series is for DC power rails
Surge current capability up to 500 A
Wide package offering, including multi-line high-power device packages
Devices optimized to support specific applications
The ESDA15P60-1U1M is an unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients. The device is Ideal for applications where high power TVS and board space saving is required
Low clamping voltage
Typical Peak Pulse power:1200 W (8/20 μs)
Stand-off voltage 13.2 V
Unidirectional diode
Low leakage current:50 nA at 25 °C
±30 kV (air discharge)
±30 kV (contact discharge)