Références fabricant

STMicroelectronics Surface, 2-Pin, TRIAC 800 V, Gate Trigger 1.3 V

N° de stock RS:: 163-7348
Référence fabricant:: T1050-8G-TR
Fabricant:: STMicroelectronics

STMicroelectronics Surface, 2-Pin, TRIAC 800 V, Gate Trigger 1.3 V

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 163-7348
Référence fabricant:: T1050-8G-TR
Fabricant:: STMicroelectronics

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	STMicroelectronics
	Mount Type	Surface
	Pin Count	2
	Product Type	TRIAC
	Repetitive Peak Reverse Voltage (VDRM)	800 V
	Maximum Gate Trigger Voltage (Vgt)	1.3 V
	Height	4.6 mm
	Length	10.28 mm
	Maximum Gate Trigger Current (Igt)	50 mA
	Maximum Holding Current (Ih)	50 mA
	Maximum Operating Temperature	125 °C
	Minimum Operating Temperature	-40 °C
	Package Type	TO-2
	Peak On-State Voltage	1.55 V
	Rated Average On-State Current (Irms)	10 A
	Repetitive Peak Off-State Current	1 mA
	Surge Current Rating	105 A
	Width	9.35 mm

	Sélectionner tout
	Marque STMicroelectronics
	Mount Type Surface
	Pin Count 2
	Product Type TRIAC
	Repetitive Peak Reverse Voltage (VDRM) 800 V
	Maximum Gate Trigger Voltage (Vgt) 1.3 V
	Height 4.6 mm
	Length 10.28 mm
	Maximum Gate Trigger Current (Igt) 50 mA
	Maximum Holding Current (Ih) 50 mA
	Maximum Operating Temperature 125 °C
	Minimum Operating Temperature -40 °C
	Package Type TO-2
	Peak On-State Voltage 1.55 V
	Rated Average On-State Current (Irms) 10 A
	Repetitive Peak Off-State Current 1 mA
	Surge Current Rating 105 A
	Width 9.35 mm

1637348_DataSheet 1

Available either in through-hole or surface mount packages, the BTA10, BTB10 and T10xx Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers. The Snubberless™ versions (W suffix and T10xx) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at 2500 VRMS).

Medium current triac

Low thermal resistance with clip bonding

Low thermal resistance insulation ceramic for insulated BTA

High commutation (4Q) or very high commutation (3Q, Snubberless™) capability

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.