onsemi MC100EPT26DTG, Logic Level Translator Translator 2 LVPECL/LVDS to LVTTL, 8-Pin TSSOP
- N° de stock RS:
- 186-9279
- Référence fabricant:
- MC100EPT26DTG
- Fabricant:
- onsemi
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
8,99 €
(TVA exclue)
10,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 8,99 € |
| 10 + | 7,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 186-9279
- Référence fabricant:
- MC100EPT26DTG
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Logic Level Translator | |
| Direction Type | Uni-Directional | |
| Maximum Propagation Delay Time @ CL | 800ps | |
| Mount Type | Surface | |
| Number of Elements per Chip | 2 | |
| Package Type | TSSOP | |
| Output Type | TTL | |
| Pin Count | 8 | |
| Logic Function | Translator | |
| Maximum Low Level Output Current | 24mA | |
| Maximum High Level Output Current | -3mA | |
| Minimum Supply Voltage | 3.6V | |
| Translation | LVPECL/LVDS to LVTTL | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.95mm | |
| Length | 3.1mm | |
| Series | MC100EPT2 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Logic Level Translator | ||
Direction Type Uni-Directional | ||
Maximum Propagation Delay Time @ CL 800ps | ||
Mount Type Surface | ||
Number of Elements per Chip 2 | ||
Package Type TSSOP | ||
Output Type TTL | ||
Pin Count 8 | ||
Logic Function Translator | ||
Maximum Low Level Output Current 24mA | ||
Maximum High Level Output Current -3mA | ||
Minimum Supply Voltage 3.6V | ||
Translation LVPECL/LVDS to LVTTL | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.95mm | ||
Length 3.1mm | ||
Series MC100EPT2 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The MC100EPT26 is a 1:2 Fanout Differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of the EPT26 makes it Ideal for applications which require the low skew duplication of a signal in a tightly packed PC board. The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0bar input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground via a 0.01 uF capacitor.
1.4ns Typical Propagation Delay
Maximum Frequency > 275 MHz Typical
The 100 Series Contains Temperature Compensation
Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
Open Input Default State
Safety Clamp on Inputs
24mA TTL outputs
Q Outputs will default LOW with inputs open or at VEE VBB Output