RS PRO Constant Wattage Trace Heating Cable, 30W/m, 110V ac, -60 → +200 °C, 20m
- N° de stock RS:
- 703-3170
- Fabricant:
- RS PRO
Sous-total (1 bobine de 20 mètres)*
518,33 €
(TVA exclue)
627,18 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 518,33 € | 25,917 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 703-3170
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Cable Type | Constant Wattage | |
| Output per Metre | 30W | |
| Self Regulating | No | |
| Voltage Rating | 110V ac | |
| Minimum Operating Temperature | -60°C | |
| Maximum Operating Temperature | +200°C | |
| Operating Temperature Range | -60 → +200 °C | |
| Length | 20m | |
| Sheath Material | Silicone Rubber | |
| Hazardous Area Certification | ATEX | |
| Standards Met | BS EN 60079-0:2009, BS EN 60079-30-1:2007 | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Cable Type Constant Wattage | ||
Output per Metre 30W | ||
Self Regulating No | ||
Voltage Rating 110V ac | ||
Minimum Operating Temperature -60°C | ||
Maximum Operating Temperature +200°C | ||
Operating Temperature Range -60 → +200 °C | ||
Length 20m | ||
Sheath Material Silicone Rubber | ||
Hazardous Area Certification ATEX | ||
Standards Met BS EN 60079-0:2009, BS EN 60079-30-1:2007 | ||
Statut RoHS non applicable
- Pays d'origine :
- GB
RS PRO Trace Heating Cable - Constant Wattage
RS PRO is proud to offer a range of trace heating cables. These cables are of the highest quality and are designed to be cut from reel lengths and site terminated to suit pipe work. The constant wattage tape consists of several short heating zones, each connected across a pair of continuous bus-wire conductors. Each complete heating zone will give its full-rated design output with circuit voltage applied to the bus-wire conductors.
Features and Benefits
- Cable measurements available are 20 m or 100 m
- Designed to be cut from reel lengths
- Parallel circuit - constant watt for hazardous areas
- Short heating zones
Specification
- Cable Type: Constant Wattage
- Sheath Material: Silicone Rubber
- Voltage Rating: 110 V or 240 V
- Operating Temperature Range -60 to +200 °C
- Hazardous Area Certification: ATEX
- BS EN 60079-0:2009, BS EN 60079-30-1:2007
RS PRO 110V ac Trace Heating Cable Variants – Available Separately
RS PRO 240V ac Trace Heating Cable Variants – Available Separately
Liens connexes
- RS PRO Constant Wattage Trace Heating Cable 110V ac 20m
- RS PRO Constant Wattage Trace Heating Cable 240V ac 20m
- RS PRO Constant Wattage 15W/m -60 → +200 °C, 20m
- RS PRO Constant Wattage 20W/m -60 → +200 °C, 20m
- RS PRO Constant Wattage 40W/m -60 → +200 °C, 20m
- RS PRO Constant Wattage Trace Heating Cable -60 → +200 °C, 50m
- RS PRO Constant Wattage Trace Heating Cable 240V ac 50m
- RS PRO Constant Wattage Trace Heating Cable 240V ac 100m