Infineon, Thyristor Trigger Module 1600 V 14 kA, 1050 A 250 mA 1.53 V
- N° de stock RS:
- 262-5496
- Référence fabricant:
- TZ600N16KOFHPSA1
- Fabricant:
- Infineon
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 262-5496
- Référence fabricant:
- TZ600N16KOFHPSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Thyristor Trigger Module | |
| Rated Average On-State Current Irms | 1050A | |
| Repetitive Peak Reverse Voltage VDRM | 1600V | |
| Surge Current Rating | 14kA | |
| Maximum Gate Trigger Current Igt | 250mA | |
| Maximum Gate Trigger Voltage Vgt | 2.2V | |
| Maximum Holding Current Ih | 300mA | |
| Maximum Operating Temperature | 140°C | |
| Width | 50mm | |
| Series | TZ600N | |
| Standards/Approvals | RoHS | |
| Height | 52mm | |
| Length | 101mm | |
| Peak On-State Voltage | 1.53V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Thyristor Trigger Module | ||
Rated Average On-State Current Irms 1050A | ||
Repetitive Peak Reverse Voltage VDRM 1600V | ||
Surge Current Rating 14kA | ||
Maximum Gate Trigger Current Igt 250mA | ||
Maximum Gate Trigger Voltage Vgt 2.2V | ||
Maximum Holding Current Ih 300mA | ||
Maximum Operating Temperature 140°C | ||
Width 50mm | ||
Series TZ600N | ||
Standards/Approvals RoHS | ||
Height 52mm | ||
Length 101mm | ||
Peak On-State Voltage 1.53V | ||
Automotive Standard No | ||
The Infineon thyristor module is used for phase control in pressure contact technology for high reliability. This Thyristor is designed for high overload and power cycling requirements. This device has high DC blocking stability over whole lifetime. This Thyristor offers high surge current capability especially for short grid spikes.
Threshold voltage is 0.9 V
Holding current is 300 mA
Gate controlled delay time is 4 micro second
Industrial standard package
Electrically insulated baseplate
Short on fail
Highest robustness
One supplier for a broad range of Power Block Modules
Liens connexes
- Infineon TZ600N16KOFHPSA1 1050 A 250 mA 1.53 V
- Infineon 500 A 250 mA 1.53 V 5-Pin
- Infineon TZ500N16KOFHPSA1 500 A 250 mA 1.53 V 5-Pin
- Semikron Danfoss SKKH 520/16 E 506 A 200 A 1.53 V Module
- Infineon 820 A 250 mA 1.27 V
- Infineon 260 A 150 mA 1.41 V
- Infineon 190 A 145 mA 5.2 kA 1.52 V
- Infineon 162 A 150 mA 1.41 V