STMicroelectronics STTD6050H-12M2Y, Thyristor 1200 V, 60 A 50 mA 525 A 10 V
- N° de stock RS:
- 228-3060
- Référence fabricant:
- STTD6050H-12M2Y
- Fabricant:
- STMicroelectronics
Sous-total (1 unité)*
16,47 €
(TVA exclue)
19,93 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 100 unité(s) expédiée(s) à partir du 26 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 16,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 228-3060
- Référence fabricant:
- STTD6050H-12M2Y
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Thyristor | |
| Rated Average On-State Current Irms | 60A | |
| Thyristor Type | SCR | |
| Package Type | ACEPACK SMIT | |
| Repetitive Peak Reverse Voltage VDRM | 1200V | |
| Surge Current Rating | 525A | |
| Mount Type | Surface | |
| Maximum Gate Trigger Current Igt | 50mA | |
| Pin Count | 9 | |
| Maximum Holding Current Ih | 100mA | |
| Minimum Operating Temperature | -40°C | |
| Maximum Gate Trigger Voltage Vgt | 1.3V | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q101 | |
| Peak On-State Voltage | 10V | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Thyristor | ||
Rated Average On-State Current Irms 60A | ||
Thyristor Type SCR | ||
Package Type ACEPACK SMIT | ||
Repetitive Peak Reverse Voltage VDRM 1200V | ||
Surge Current Rating 525A | ||
Mount Type Surface | ||
Maximum Gate Trigger Current Igt 50mA | ||
Pin Count 9 | ||
Maximum Holding Current Ih 100mA | ||
Minimum Operating Temperature -40°C | ||
Maximum Gate Trigger Voltage Vgt 1.3V | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q101 | ||
Peak On-State Voltage 10V | ||
The STMicroelectronics STTD6050H-12M2Y is a top cooled surface mount module that integrates a single-phase half-controlled bridge rectifier. It is rated at 1200 V and delivers an output full wave DC current up to 75 AAV. Each single embedded device has a rated current of 60 ARMS and a symmetric blocking voltage of 1200 V. With its top cooling pad opposite to the printed circuit board this device allows the PCB-module-heat sink stack to be automatically assembled.
1200 V symmetrical blocking voltage
High junction temperature: 150 °C
High noise immunity, static dV/dt: 1000 V/μs
Embed two TN6050HP-12 and two STBR6012 dies
Module qualified according to AQG324 recommendation
SMD with isolated top cooled tab
Terminal pins opposite to cooling side