Infineon TDB6HK124N16RRBOSA1 1600 V 650 A, 125 A 150 mA 1.35 V 22-Pin
- N° de stock RS:
- 165-5337
- Référence fabricant:
- TDB6HK124N16RRBOSA1
- Fabricant:
- Infineon
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 165-5337
- Référence fabricant:
- TDB6HK124N16RRBOSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Rated Average On-State Current Irms | 125A | |
| Repetitive Peak Reverse Voltage VDRM | 1600V | |
| Surge Current Rating | 650A | |
| Mount Type | PCB | |
| Maximum Gate Trigger Current Igt | 150mA | |
| Pin Count | 22 | |
| Maximum Holding Current Ih | 200mA | |
| Maximum Gate Trigger Voltage Vgt | 2.5V | |
| Maximum Operating Temperature | 125°C | |
| Length | 107.5mm | |
| Height | 17mm | |
| Width | 45 mm | |
| Peak On-State Voltage | 1.35V | |
| Repetitive Peak Off-State Current | 10mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Rated Average On-State Current Irms 125A | ||
Repetitive Peak Reverse Voltage VDRM 1600V | ||
Surge Current Rating 650A | ||
Mount Type PCB | ||
Maximum Gate Trigger Current Igt 150mA | ||
Pin Count 22 | ||
Maximum Holding Current Ih 200mA | ||
Maximum Gate Trigger Voltage Vgt 2.5V | ||
Maximum Operating Temperature 125°C | ||
Length 107.5mm | ||
Height 17mm | ||
Width 45 mm | ||
Peak On-State Voltage 1.35V | ||
Repetitive Peak Off-State Current 10mA | ||
- Pays d'origine :
- CN
Half Controlled Bridge Modules, TDB6HK Series, Infineon
The Infineon Thyristor modules vary in configuration, offering half controlled bridges, half controlled bridge with NTC and half controlled bridge with Chopper (IGBT) and NTC (negative temperature coefficient) temperature sensor. They cover 1600 volts and current ranges from 95A to 360 Amps. The modules will differ in the standard Industry housing from EconoBRIDGE™ and IsoPACK™. Typical applications may be an Active rectifier and a half controlled B6 bridge.
Isolated copper base plate
Integrated NTC temperature sensor
RoHS compliant
Compact Standard Housing
Solder Contact Technology / PressFIT Contact Technology
IsoPACK Modules with screwable power terminals
IsoPACK version is designed for replacing 3 x 20mm SCR / diode half bridge module
Thyristors - Infineon
The Infineon Phase Control Thyristors (PCT) offer different types of thyristors such as the capsule version, thyristor module and the combination PowerBLOCK thyristor/ diode module. The thyristor module style comes with a stable pressure contact which uses an isolated copper base plate in a range of sizes up to 60mm.