IXYS, Diode/Thyristor Module SCR 1200 V 1.62 kA, 100 A 80 mA SOT-227B 4-Pin
- N° de stock RS:
- 135-8263
- Référence fabricant:
- CLA100PD1200NA
- Fabricant:
- IXYS
Offre groupée disponible
Sous-total (1 unité)*
33,70 €
(TVA exclue)
40,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 64 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 33,70 € |
| 5 + | 28,91 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 135-8263
- Référence fabricant:
- CLA100PD1200NA
- Fabricant:
- IXYS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | IXYS | |
| Product Type | Diode/Thyristor Module SCR | |
| Rated Average On-State Current Irms | 100A | |
| Package Type | SOT-227B | |
| Repetitive Peak Reverse Voltage VDRM | 1200V | |
| Surge Current Rating | 1.62kA | |
| Mount Type | Surface | |
| Maximum Gate Trigger Current Igt | 80mA | |
| Pin Count | 4 | |
| Maximum Holding Current Ih | 100mA | |
| Maximum Gate Trigger Voltage Vgt | 1.6V | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Height | 12.22mm | |
| Length | 38.23mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque IXYS | ||
Product Type Diode/Thyristor Module SCR | ||
Rated Average On-State Current Irms 100A | ||
Package Type SOT-227B | ||
Repetitive Peak Reverse Voltage VDRM 1200V | ||
Surge Current Rating 1.62kA | ||
Mount Type Surface | ||
Maximum Gate Trigger Current Igt 80mA | ||
Pin Count 4 | ||
Maximum Holding Current Ih 100mA | ||
Maximum Gate Trigger Voltage Vgt 1.6V | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Height 12.22mm | ||
Length 38.23mm | ||
Automotive Standard No | ||
CLAxxPD series Thyristor Modules
The IXYS CLAxxPD series phase leg modules contain a thyristor and series diode for use in half-wave AC power control and rectifier applications. The devices are housed in industry standard isolated base SOT227B packages.
• Isolated copper baseplate for good heat transfer
• Two-hole screw fixing
• M4 screw Terminal connections
• 3000Vac isolation rating
Thyristors - IXYS
A Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. They act as bistable switches, conducting when their gate receives a current trigger, and continue to conduct while they are forward biased. Thyristors are synonymous to Silicon-Controlled Rectifier (SCR).
Encapsulated modules with electrically isolated base plate. Suitable for applications such as battery chargers, welders and plating equipment, regulated power supplies and temperature and speed control circuits.