Dormer Threading Tap HSS-XS1 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread
- N° de stock RS:
- 752-5348
- Référence fabricant:
- EP00M2.5
- Fabricant:
- Dormer
Visuel non contractuel
Sous-total (1 unité)*
40,00 €
(TVA exclue)
48,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 40,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 752-5348
- Référence fabricant:
- EP00M2.5
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Set Type | Threading Tap | |
| Thread Size | M2.5 | |
| Type | Spiral Point | |
| Pitch | 0.45mm | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Overall Length | 50 mm | |
| Number of Pieces | 1 | |
| Hand/Machine Tap | Machine Tap | |
| Material | HSS-XS1 | |
| Shank Diameter | 2.8 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Set Type Threading Tap | ||
Thread Size M2.5 | ||
Type Spiral Point | ||
Pitch 0.45mm | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Overall Length 50 mm | ||
Number of Pieces 1 | ||
Hand/Machine Tap Machine Tap | ||
Material HSS-XS1 | ||
Shank Diameter 2.8 mm | ||
- Pays d'origine :
- SE
HSS-XS1 Spiral Point Tap (EP006H)
Multi-application machine spiral point taps.
Superb productivity in a wide range of materials
Short thread length for low torque & better chip evacuation
High speed cobalt steel with gold coating
Metric coarse construction with right hand cut
Short thread length for low torque & better chip evacuation
High speed cobalt steel with gold coating
Metric coarse construction with right hand cut
Standards
DIN 371-376
Liens connexes
- Dormer Threading Tap HSS-XS1 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread
- Dormer Threading Tap HSS 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.75mm Pitch Metric Standard Machine Tap M12 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.5mm Pitch Metric Standard Machine Tap M10 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.0mm Pitch Metric Standard Machine Tap M6 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.25mm Pitch Metric Standard Machine Tap M8 Thread