Dormer Threading Tap HSS-XS1 1-Piece 1.25mm Pitch Metric Standard Machine Tap M8 Thread
- N° de stock RS:
- 528-3963
- Référence fabricant:
- E001M8
- Fabricant:
- Dormer
Visuel non contractuel
Sous-total (1 unité)*
26,31 €
(TVA exclue)
31,84 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 26,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 528-3963
- Référence fabricant:
- E001M8
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Thread Size | M8 | |
| Set Type | Threading Tap | |
| Type | Spiral Point | |
| Pitch | 1.25mm | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Number of Pieces | 1 | |
| Overall Length | 72 mm | |
| Hand/Machine Tap | Machine Tap | |
| Material | HSS-XS1 | |
| Shank Diameter | 8 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Thread Size M8 | ||
Set Type Threading Tap | ||
Type Spiral Point | ||
Pitch 1.25mm | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Number of Pieces 1 | ||
Overall Length 72 mm | ||
Hand/Machine Tap Machine Tap | ||
Material HSS-XS1 | ||
Shank Diameter 8 mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- SE
Spiral Point
Spiral point taps have a superior geometry which gives consistent and long tool life when threading through holes.
MTTX-HSS Taps
MTT-X taps are manufactured from premium quality vanadium powder steel, branded HSS-XS1, for an unbeatable combination of toughness, edge strength and wear resistance. This winning combination enables them to withstand the stresses of threading in tough materials.
Liens connexes
- Dormer Threading Tap HSS-XS1 1-Piece 1.25mm Pitch Metric Standard Machine Tap M8 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.75mm Pitch Metric Standard Machine Tap M12 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.5mm Pitch Metric Standard Machine Tap M10 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 1.0mm Pitch Metric Standard Machine Tap M6 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.4mm Pitch Metric Standard Machine Tap M2 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.35mm Pitch Metric Standard Machine Tap M1.6 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread