Dormer Threading Tap HSS-E 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- N° de stock RS:
- 299-9126
- Référence fabricant:
- E207-M5
- Fabricant:
- Dormer
Visuel non contractuel
Sous-total (1 unité)*
13,67 €
(TVA exclue)
16,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 13,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 299-9126
- Référence fabricant:
- E207-M5
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Thread Size | M5 | |
| Set Type | Threading Tap | |
| Type | Spiral Flute | |
| Pitch | 0.8mm | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Overall Length | 70 mm | |
| Number of Pieces | 1 | |
| Hand/Machine Tap | Machine Tap | |
| Material | HSS-E | |
| Shank Diameter | 6 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Thread Size M5 | ||
Set Type Threading Tap | ||
Type Spiral Flute | ||
Pitch 0.8mm | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Overall Length 70 mm | ||
Number of Pieces 1 | ||
Hand/Machine Tap Machine Tap | ||
Material HSS-E | ||
Shank Diameter 6 mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- IT
E207 Metric Pitch Spiral Cobalt Machine Tap Bits
A range of metric pitch spiral cobalt machine tap bits. These tap bits meet stringent high-production machining demands due to significant resistance to wear and high temperatures.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
Standard: DIN 371
Rolled Flute Taps
Bright finish fluteless taps; for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Liens connexes
- Dormer Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-E-PM 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS 0.8mm Pitch Metric Coarse Standard M5 Thread
- Dormer Threading Tap HSS 1-Piece 0.8mm Pitch Metric Standard M5 Thread
- Dormer Threading Tap HSS-E-PM 0.8mm Pitch Metric Standard M5 Thread
- Dormer Threading Tap Carbide 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread