Dormer Threading Tap, 2.5 Thread, Metric Standard, Machine Tap
- N° de stock RS:
- 299-9081
- Référence fabricant:
- E207-M2,50
- Fabricant:
- Dormer
Visuel non contractuel
Sous-total (1 unité)*
14,87 €
(TVA exclue)
17,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 12 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 14,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 299-9081
- Référence fabricant:
- E207-M2,50
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Sub Type | Spiral Flute | |
| Thread Size | 2.5 | |
| Product Type | Threading Tap | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Number of Pieces | 1 | |
| Overall Length | 50mm | |
| Hand/Machine Tap | Machine Tap | |
| Material | High Speed Steel-E | |
| Shank Diameter | 2.8mm | |
| Standards/Approvals | ISO 529 | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Sub Type Spiral Flute | ||
Thread Size 2.5 | ||
Product Type Threading Tap | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Number of Pieces 1 | ||
Overall Length 50mm | ||
Hand/Machine Tap Machine Tap | ||
Material High Speed Steel-E | ||
Shank Diameter 2.8mm | ||
Standards/Approvals ISO 529 | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
E207 Metric Pitch Spiral Cobalt Machine Tap Bits
A range of metric pitch spiral cobalt machine tap bits. These tap bits meet stringent high-production machining demands due to significant resistance to wear and high temperatures.
These tap bits have a short 2-thread
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
Standard: DIN 371
Rolled Flute Taps
Bright finish fluteless taps; for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Liens connexes
- Dormer HSS-E M2.5 Straight Flute Thread Tap, 50 mm length
- Dormer HSS-E M3 Spiral Flute Thread Tap, 56 mm length
- Dormer HSS-E M2 Spiral Flute Thread Tap, 45 mm length
- Dormer HSS-E M10 Spiral Flute Thread Tap, 100 mm length
- Dormer HSS-E M8 Spiral Flute Thread Tap, 90 mm length
- Dormer HSS-E M6 Spiral Flute Thread Tap, 80 mm length
- HSS straight flute tap set,M2.5 0.45mm
- HSS spiral flute ground tap,M3.5 0.6mm