RS PRO Threading Tap HSS 1-Piece PG Standard Hand Tap PG13.5 → 18 Thread
- N° de stock RS:
- 427-941
- Numéro d'article Distrelec:
- 304-18-748
- Fabricant:
- RS PRO
Sous-total (1 unité)*
41,94 €
(TVA exclue)
50,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s)
- Plus 88 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 41,94 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 427-941
- Numéro d'article Distrelec:
- 304-18-748
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Set Type | Threading Tap | |
| Thread Size | PG13.5 → 18 | |
| Type | Straight Flute | |
| Thread Standard | PG | |
| Thread Direction | Right Hand | |
| Overall Length | 80mm | |
| Number of Pieces | 1 | |
| Hand/Machine Tap | Hand Tap | |
| Material | HSS | |
| Shank Diameter | 16mm | |
| Shank Type | Plain | |
| Thread Pitch | 18TPI | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Set Type Threading Tap | ||
Thread Size PG13.5 → 18 | ||
Type Straight Flute | ||
Thread Standard PG | ||
Thread Direction Right Hand | ||
Overall Length 80mm | ||
Number of Pieces 1 | ||
Hand/Machine Tap Hand Tap | ||
Material HSS | ||
Shank Diameter 16mm | ||
Shank Type Plain | ||
Thread Pitch 18TPI | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
RS PRO HSS PG 13.5-18 Straight Flute Threading Tap, 80 mm Length
This RS PRO threading tap can be inserted into pre-drilled holes to create screw threads. This conduit tap has an 80° inclusive thread angle, which enables threads to be cut on very thin wall sections without piercing through the wall.
The threading tap is designed for manual operation. It's made from a high-speed steel material that can withstand heat and friction, so it will last a long time even when used for heavy-duty applications. The tap has a straight flute design, making it versatile and suitable for a variety of general-purpose applications. Use it to create threads in domestic, commercial or industrial environments.
The threading tap is designed for manual operation. It's made from a high-speed steel material that can withstand heat and friction, so it will last a long time even when used for heavy-duty applications. The tap has a straight flute design, making it versatile and suitable for a variety of general-purpose applications. Use it to create threads in domestic, commercial or industrial environments.
Features and Benefits
• Hand tap
• HSS (high-speed steel) material
• One piece
• Overall length of 80 mm
• Threading tap set
• Shank diameter of 16 mm
• PG13.5-18 thread size
• PG (Panzergewinde) thread standard
• Straight flute type
• HSS (high-speed steel) material
• One piece
• Overall length of 80 mm
• Threading tap set
• Shank diameter of 16 mm
• PG13.5-18 thread size
• PG (Panzergewinde) thread standard
• Straight flute type
Liens connexes
- EVENTUS Threading Tap HSS 1-Piece PG Standard PG13.5 Thread
- RS PRO Threading Tap HSS 1-Piece PG Standard Hand Tap PG11 → 18 Thread
- RS PRO Threading Tap HSS 1-Piece PG Standard Hand Tap PG7 → 20 Thread
- RS PRO Threading Tap HSS 1-Piece PG Standard Hand Tap PG16 → 18 Thread
- RS PRO Thread Tap HSS 1-Piece PG Standard Hand Tap PG36 Thread
- RS PRO Thread Tap HSS 1-Piece PG Standard Hand Tap PG29 Thread
- RS PRO Thread Tap HSS 1-Piece PG Standard Hand Tap PG21 Thread
- EVENTUS Threading Tap HSS 1-Piece PG Standard PG11 Thread