Dormer Threading Tap, M4 Thread, Metric Coarse Standard, Hand Tap
- N° de stock RS:
- 274-474
- Référence fabricant:
- E557M4
- Fabricant:
- Dormer
Sous-total (1 unité)*
9,12 €
(TVA exclue)
11,04 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 9,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 274-474
- Référence fabricant:
- E557M4
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Thread Size | M4 | |
| Sub Type | Spiral Flute | |
| Product Type | Threading Tap | |
| Thread Standard | Metric Coarse | |
| Thread Direction | Right Hand | |
| Overall Length | 53mm | |
| Hand/Machine Tap | Hand Tap | |
| Material | HSS | |
| Finish | Bright | |
| Standards/Approvals | ISO Standard | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Thread Size M4 | ||
Sub Type Spiral Flute | ||
Product Type Threading Tap | ||
Thread Standard Metric Coarse | ||
Thread Direction Right Hand | ||
Overall Length 53mm | ||
Hand/Machine Tap Hand Tap | ||
Material HSS | ||
Finish Bright | ||
Standards/Approvals ISO Standard | ||
Statut RoHS : Exempté
- Pays d'origine :
- IN
The Dormer Tapping is designed for manual tapping using electric tools, and it addresses a common challenge in tapping, especially for blind holes. When tapping, long, stringy chips are often produced, and if not properly evacuated, they can cause serious issues. The helical flute design helps to move the chips away from the hole during tapping, preventing this problem.
Helical Flute Design
Improved Chip Evacuation
Liens connexes
- Dormer Threading Tap 0.7mm Pitch Metric Coarse Standard Hand Tap M4 Thread
- Dormer Threading Tap HSS 0.7mm Pitch Metric Coarse Standard M4 Thread
- Dormer Thread Tap 0.7mm Pitch Metric Coarse Standard Machine Tap M4 Thread
- Dormer Thread Tap 0.7mm Pitch Metric Coarse Standard Manual or machine tap M4 Thread
- Dormer Threading Tap 0.8mm Pitch Metric Coarse Standard Hand Tap M5 Thread
- Dormer Threading Tap 1.5mm Pitch Metric Coarse Standard Hand Tap M10 Thread
- Dormer Threading Tap 1.25mm Pitch Metric Coarse Standard Hand Tap M8 Thread
- Dormer Threading Tap 0.5mm Pitch Metric Coarse Standard Hand Tap M3 Thread