Recoil Thread Repair Insert, Drill Size 5.2 mm
- N° de stock RS:
- 528-643
- Référence fabricant:
- 25053
- Fabricant:
- Recoil
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
L'unité (en paquet de 20)
5,62 €
(TVA exclue)
6,80 €
(TVA incluse)
- N° de stock RS:
- 528-643
- Référence fabricant:
- 25053
- Fabricant:
- Recoil
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Recoil | |
| Product Type | Thread Repair Insert | |
| Drill Size | 5.2 mm | |
| Thread Length | 7.5mm | |
| Standards/Approvals | AS9100, AS6733, AGS3600, BS7751, AS8455, TS16949, NASM124651, NASM122076, MA3281, BS7753, MA3329, BS4377, ISO14001, General Electric - N926, NASM8846, MA3280, BS7752, NASM21209, TS157, ISO9001, LN9499, General Electric - C981, MA3279, BACI12AE - Boeing, DIN8140, AGS3700, MA3330, MA3331, LN9039 | |
| Sélectionner tout | ||
|---|---|---|
Marque Recoil | ||
Product Type Thread Repair Insert | ||
Drill Size 5.2 mm | ||
Thread Length 7.5mm | ||
Standards/Approvals AS9100, AS6733, AGS3600, BS7751, AS8455, TS16949, NASM124651, NASM122076, MA3281, BS7753, MA3329, BS4377, ISO14001, General Electric - N926, NASM8846, MA3280, BS7752, NASM21209, TS157, ISO9001, LN9499, General Electric - C981, MA3279, BACI12AE - Boeing, DIN8140, AGS3700, MA3330, MA3331, LN9039 | ||
Statut RoHS : Exempté
Metric Replacement Inserts
Recoil helically wound wire thread inserts can be used to strengthen threads giving applications a longer life. Each insert shares the load over the entire bolt and hole, improving holding or pull out resistance and providing more even distribution of stress and load.
Recoil inserts are generally made of type Stainless Steel 304 (AS 7245) Austenitic corrosion resistant steel rolled into a diamond shape cross-section.
Lightweight yet robust design gives superior holding power
Quick and simple installation process
Length is 1.5D
Liens connexes
- Recoil Thread Repair Insert, Drill Size 14.25 mm
- Recoil Thread Repair Insert, Drill Size 4.2 mm
- Recoil Thread Repair Insert, Drill Size 10.4 mm
- Recoil Thread Repair Insert, Drill Size 16.5 mm
- Recoil Thread Repair Insert, Drill Size 6.7 mm
- Recoil Thread Repair Insert, Drill Size 3.2 mm
- Recoil Thread Repair Insert, Drill Size 6.3 mm
- Böllhoff Thread Repair Insert, Drill Size 5.2 mm