ITW Devcon FLEXANE 80/94L HARDENER, FLEXANE 94L RESIN Urethane Liquid
- N° de stock RS:
- 692-867
- Référence fabricant:
- 15250
- Fabricant:
- ITW Devcon
Sous-total (1 unité)*
122,40 €
(TVA exclue)
148,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 122,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 692-867
- Référence fabricant:
- 15250
- Fabricant:
- ITW Devcon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ITW Devcon | |
| Product Type | Urethane Liquid | |
| Trade Name | FLEXANE 80/94L HARDENER, FLEXANE 94L RESIN | |
| Product Form | Liquid | |
| Maximum Operating Temperature | 82°C | |
| Standards/Approvals | EN140 (personal protective equipment Standards referenced), EN166, EN374 | |
| Base Chemical | Methylenedi, Cyclohexyl Isocyanate | |
| Cure Time | 16 h | |
| Package Size | 500 g | |
| Sélectionner tout | ||
|---|---|---|
Marque ITW Devcon | ||
Product Type Urethane Liquid | ||
Trade Name FLEXANE 80/94L HARDENER, FLEXANE 94L RESIN | ||
Product Form Liquid | ||
Maximum Operating Temperature 82°C | ||
Standards/Approvals EN140 (personal protective equipment Standards referenced), EN166, EN374 | ||
Base Chemical Methylenedi, Cyclohexyl Isocyanate | ||
Cure Time 16 h | ||
Package Size 500 g | ||
- Flexane 94L (EN - SDS)
- Datasheet
- Cold weather and Devcon products note
- Contains: Methylenediphenyl diisocyanate (MDI) - Restricted to Professional Users
- Restricted to Professional Users Only
- As from 24 August 2023 adequate training is required before industrial or professional use
- Flexane 94L (FR - SDS)
- Flexane 94L (NL - SDS)
- Pays d'origine :
- IE
Flexane® Liquid Urethanes
A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads.
Available in three grades to cover a variety of applications with different flexibility requirements
Good abrasion and wear resistance
Self levelling
Can be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.
Flexane 60 High flexibility
Flexane 80 Medium flexibility
Flexane 94 Low flexibility
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.