Pfannenberg 1710300000 SPDT Thermostat, 10 A, 120V ac, 240 V ac, 60 °C, 0 °C
- N° de stock RS:
- 497-513
- Numéro d'article Distrelec:
- 154-21-510
- Référence fabricant:
- 17103000000
- Fabricant:
- Pfannenberg
Sous-total (1 unité)*
31,67 €
(TVA exclue)
38,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En voie de retrait du marché
- 27 dernière(s) unité(s), prête(s) à l'envoi
Unité | Prix par unité |
|---|---|
| 1 + | 31,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 497-513
- Numéro d'article Distrelec:
- 154-21-510
- Référence fabricant:
- 17103000000
- Fabricant:
- Pfannenberg
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Pfannenberg | |
| Product Type | Thermostat | |
| Sub Type | Thermostat | |
| Contact Voltage | 240V ac | |
| Switch Configuration | SPDT | |
| Supply Voltage | 120, 240V ac | |
| Maximum Operating Temperature | 60°C | |
| Contact Current | 10A | |
| Minimum Operating Temperature | 0°C | |
| Standards/Approvals | RoHS, EN 60715 | |
| Series | 1710300000 | |
| Temperature Setting Range | 0 to 60 °C | |
| Sélectionner tout | ||
|---|---|---|
Marque Pfannenberg | ||
Product Type Thermostat | ||
Sub Type Thermostat | ||
Contact Voltage 240V ac | ||
Switch Configuration SPDT | ||
Supply Voltage 120, 240V ac | ||
Maximum Operating Temperature 60°C | ||
Contact Current 10A | ||
Minimum Operating Temperature 0°C | ||
Standards/Approvals RoHS, EN 60715 | ||
Series 1710300000 | ||
Temperature Setting Range 0 to 60 °C | ||
The Pfannenberg Thermostats are used as temperature regulators and thus to control filter fans, electrical cabinet heaters or can serve as an alarm set point. They are available as changeover contacts. In combination with electrical cabinet heaters, they can control temperature and also, particularly in outdoor applications, ensure that the electrical cabinet is 'artificially' dehumidified. This means that the temperature is kept over the dew point so that no condensation forms from the air preventing a potential short circuit. The combination with filter fans provides additional savings on energy, maintenance time and therefore provides a better environmental balance which improves the filter fans effectiveness.
Suitable for the operation of fans and heaters
Switching temperature difference 1K
IP 20 protection for installation inside the electrical cabinet
Temperature set range 0 degree C to 60 degree C
cURus and EAC approved
Optimized energy consumption for heaters and filter fans
Easy installation on profile rails
Extends the service life of heaters and fans