TDK NTC Thermistor, NTC Type 2.2 kΩ 3.5 mm 36 mm 3.5 mm
- N° de stock RS:
- 146-0346
- Référence fabricant:
- B57891M0222J000
- Fabricant:
- TDK
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 146-0346
- Référence fabricant:
- B57891M0222J000
- Fabricant:
- TDK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TDK | |
| Series | B57891M | |
| Product Type | NTC Thermistor | |
| Temperature Coefficient Type | NTC | |
| Packaging | Tape & Reel | |
| Thermal Time Constant | 12s | |
| Mount Type | PCB | |
| Tolerance ± | 5% | |
| Automotive Standard | AEC-Q200 | |
| Application | DC Converter, Over Temperature Protection, Notebook, SMPS, Electronic Ballast, Dimmers, Battery Pack, Home Appliances | |
| Maximum Power Rating | 200mW | |
| Pin Count | 2 | |
| Resistance at 25°C | 2.2kΩ | |
| Standards/Approvals | AEC-Q200, UL 1434, IEC 60738-1, E69802 | |
| Length | 36mm | |
| Height | 3.5mm | |
| Depth | 3.5mm | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Sélectionner tout | ||
|---|---|---|
Marque TDK | ||
Series B57891M | ||
Product Type NTC Thermistor | ||
Temperature Coefficient Type NTC | ||
Packaging Tape & Reel | ||
Thermal Time Constant 12s | ||
Mount Type PCB | ||
Tolerance ± 5% | ||
Automotive Standard AEC-Q200 | ||
Application DC Converter, Over Temperature Protection, Notebook, SMPS, Electronic Ballast, Dimmers, Battery Pack, Home Appliances | ||
Maximum Power Rating 200mW | ||
Pin Count 2 | ||
Resistance at 25°C 2.2kΩ | ||
Standards/Approvals AEC-Q200, UL 1434, IEC 60738-1, E69802 | ||
Length 36mm | ||
Height 3.5mm | ||
Depth 3.5mm | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
- Pays d'origine :
- ID
NTC sensor elements are the functional basis for all kinds of NTC temperature sensors in all applications. TDK offers epoxy resin and glass-encapsulated elements for temperature ranges of up to 160°C and 300°C, respectively, as well as unleaded NTC chip thermistors for temperature measurement, e.g. in IGBT modules. These sensor elements, which are available with and without insulated leads, feature fast response times and very precise measurements.
Short response time
High measuring accuracy
Tight B Value tolerances available
Epoxy resin encapsulation
PTFE-insulated leads of
silver-plated nickel wire,
AWG 30 (50 mm)
PTFE-insulated leads of
silver-plated Cu wire
(19 x 0.07 mm),AWG 28 (350 mm)
UL approval (E69802)
Liens connexes
- TDK NTC Thermistor, NTC Type 10 kΩ 3.5 mm 36 mm 3.5 mm
- TDK NTC Thermistor, NTC Type 100 kΩ 3.5 mm 36 mm 3.5 mm
- TDK NTC Thermistor, NTC Type 1 kΩ 3.5 mm 3.5 mm
- TDK NTC Thermistor, NTC Type 4.7 kΩ 3.5 mm 11 mm 3.5 mm
- TDK NTC Thermistor, NTC Type 10 kΩ 4.5 mm 36 mm 4.5 mm
- TDK NTC Thermistor, NTC Type 100 kΩ 4.5 mm 36 mm 4.5 mm
- TDK Thermistor, NTC Type 2.2 kΩ 2 mm 3 mm 5 mm
- TDK Thermistor 0603 2.2 mm 1.6 mm 0.8 mm