Bergquist SPK10 Series Self-Adhesive Thermal Interface Pad, 0.152 mm Thick, 1.3 W/mK, 28.96 mm, 20.57mm, Thin Film
- N° de stock RS:
- 283-3717
- Référence fabricant:
- SPK10-0.006-AC-122
- Fabricant:
- Bergquist
Visuel non contractuel
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
L'unité (en paquet de 50)
130,80 €
(TVA exclue)
158,27 €
(TVA incluse)
- N° de stock RS:
- 283-3717
- Référence fabricant:
- SPK10-0.006-AC-122
- Fabricant:
- Bergquist
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Bergquist | |
| Product Type | Thermal Interface Pad | |
| Thickness | 0.152mm | |
| Thermal Conductivity | 1.3W/mK | |
| Self-Adhesive | Yes | |
| Trade Name | Sil-Pad K10 | |
| Conductive Material | Thin Film Polyimide | |
| Hardness | Shore A 90 | |
| Length | 28.96mm | |
| Standards/Approvals | RoHS | |
| Width | 20.57mm | |
| Colour | Beige | |
| Minimum Operating Temperature | -60°C | |
| Series | SPK10 | |
| Maximum Operating Temperature | 180°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Bergquist | ||
Product Type Thermal Interface Pad | ||
Thickness 0.152mm | ||
Thermal Conductivity 1.3W/mK | ||
Self-Adhesive Yes | ||
Trade Name Sil-Pad K10 | ||
Conductive Material Thin Film Polyimide | ||
Hardness Shore A 90 | ||
Length 28.96mm | ||
Standards/Approvals RoHS | ||
Width 20.57mm | ||
Colour Beige | ||
Minimum Operating Temperature -60°C | ||
Series SPK10 | ||
Maximum Operating Temperature 180°C | ||
- Pays d'origine :
- US
Sil-Pad K10 insulators
High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer.
Electrical insulators and thermal conductors.
These replace ceramic insulators used when mechanical resistance is required.
Overcomes the risks of breaking.
Very good electrical insulation behaviour.
Liens connexes
- Bergquist SPK4 Series Self-Adhesive Thermal Interface Pad 0.9 W/mK 20.57mm, Thin Film
- Bergquist SPK10 Series Self-Adhesive Thermal Interface Pad 1.3 W/mK 12.7mm, Thin Film
- Bergquist SPK10 Series Self-Adhesive Thermal Interface Pad 1.3 W/mK 19.05mm, Thin Film
- Bergquist SP400 Series Self-Adhesive Thermal Interface Pad 0.9 W/mK 20.57mm, Fibreglass
- Bergquist SP2000 Series Self-Adhesive Thermal Interface Pad 3.5 W/mK 20.57mm, Fibreglass
- Bergquist SPK10 Series Self-Adhesive Thermal Interface Pad 1.3 W/mK 7.92mm, Thin Film
- Bergquist Q-Pad II Series Self-Adhesive Thermal Interface Pad 2.5 W/mK 12.7mm, Q-Pad II
- Bergquist Sil-Pad K4 Series Thermal Interface Pad 0.9 W/mK 12.7mm, Thin Film Polyimide