RS PRO Test Probe, 0.7 mm Tip, 30 Vrms, 0.7 mm Socket, 10A
- N° de stock RS:
- 124-7402
- Fabricant:
- RS PRO
Sous-total (1 paire)*
9,33 €
(TVA exclue)
11,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 69 unité(s) prête(s) à être expédiée(s)
- Plus 115 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 40 unité(s) expédiée(s) à partir du 09 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paire(s) | la paire |
|---|---|
| 1 + | 9,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 124-7402
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Voltage | 30 Vrms | |
| Product Type | Test Probe | |
| Colour | Red, Black | |
| Current | 10A | |
| Tip Size | 0.7 mm | |
| Tip Material | Spring Steel | |
| Probe Socket Diameter | 0.7mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | 2011/65/EU and 2015/863 | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Voltage 30 Vrms | ||
Product Type Test Probe | ||
Colour Red, Black | ||
Current 10A | ||
Tip Size 0.7 mm | ||
Tip Material Spring Steel | ||
Probe Socket Diameter 0.7mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals 2011/65/EU and 2015/863 | ||
- Pays d'origine :
- GB
RS PRO Easy Access Back Probe Set, Black & Red
Brought to you by RS PRO, a back probe pin set, made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4 mm plug whether shrouded or not. Suitable for use with any test lead. All probes are supplied in a protective plastic tube. All models are highly reliable and excellent quality.
Features and Benefits
• 0.7 mm (0.028") O.D. Back Probe Pins
• 2 Colours available (Black & Red)
• Highly durable
• Compatible with 4 mm plugs
What are test probes?
Connecting to RS PRO multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by RS PRO, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.