Electrotherm 261 Digital Transducer 35V, 85 °C, -40 °C
- N° de stock RS:
- 913-0832
- Référence fabricant:
- LKM 261
- Fabricant:
- Electrotherm
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
103,47 €
(TVA exclue)
125,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 103,47 € |
| 5 - 9 | 100,37 € |
| 10 + | 96,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 913-0832
- Référence fabricant:
- LKM 261
- Fabricant:
- Electrotherm
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Electrotherm | |
| Product Type | Digital Transducer | |
| Output Type | 4 to 20 mA | |
| Minimum Temperature Input | -200°C | |
| Maximum Temperature Input | 600°C | |
| Series | 261 | |
| Depth | 53mm | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | DIN EN 60584-3, EN 61326-2-3:2006, EN 61326-1:2006 | |
| Sélectionner tout | ||
|---|---|---|
Marque Electrotherm | ||
Product Type Digital Transducer | ||
Output Type 4 to 20 mA | ||
Minimum Temperature Input -200°C | ||
Maximum Temperature Input 600°C | ||
Series 261 | ||
Depth 53mm | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Hazardous Area Certification NO | ||
Standards/Approvals DIN EN 60584-3, EN 61326-2-3:2006, EN 61326-1:2006 | ||
- Pays d'origine :
- DE
LKM 261 Digital Programmable Measuring Transducer
The LKM 261 is a digital programmable measuring transducer intended for mounting on a standard rail. The transducer can be programmed for different thermocouples according to DIN EN 60584-3. The LKM 261 converts the temperature dependent thermoelectric voltage of the sensors into a standard signal which ranges from 4 to 20mA. The temperature compensation is effected within the measuring transducer. The transducer can be programmed by using the universal interface type LKM S1 which is available from RS. An adjusting controller allows immediate minor display corrections
Input: thermocouples K, J, L, T, U, E, N, S, B, R, C in the respective range of definition
Zero: -200 to 600°C*
Range: 50K
Linearity error: 0.3K depending upon the thermocouple
Error of reference junction: +/- 0.5°C
Loop voltage: 10 to35V DC, reverse polarity protected
Output: 4 to 20mA current loop
Sensor break: 20mA
Short circuit: current value for room temperature
Reaction time: 0.5s
TC: 100ppm/°C
Operating temperature range: -40 to 85°C
Moisture: 95%
Mounting: 35mm DIN-rail
Type of terminals: screw terminals
Clamping range: 0.2 to 2.5mm²
Housing: Polycarbonate 75x25x53mm
Weight: approx. 60g
Vibration: 5g/10..200Hz
Approvals
EMC Emission and Noise immunity : EN 61326-1:2006 EN 61326-2-3:2006
Liens connexes
- Electrotherm Digital Transducer 35V -40 °C
- Electrotherm LKM 273 Digital Transducer 35V -25 °C
- Electrotherm LKM 145 Temperature Transmitter 35V dc -40 °C
- Electrotherm 264 Digital Transducer PT100 to PT1000 Input 35V -25 °C
- LKMelectronic LKM 224 Temperature Transmitter 35V -40 °C
- LKMelectronic LKM 211 Temperature Transmitter 35V -40 °C
- LKMelectronic LKM Temperature Transmitter 35V -40 °C
- LKMelectronic LKM 443 Temperature Transmitter 35V -40 °C