PR Electronics 3113 Temperature Converter Temperature Input 31.2V dc, 70 °C, -25 °C

N° de stock RS:: 827-5463
Référence fabricant:: 3113
Fabricant:: PR Electronics

PR Electronics 3113 Temperature Converter Temperature Input 31.2V dc, 70 °C, -25 °C

Sous-total (1 unité)*

260,70 €

(TVA exclue)

315,45 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

Temporairement en rupture de stock

2 unité(s) expédiée(s) à partir du 08 avril 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	260,70 €

*Prix donné à titre indicatif

N° de stock RS:: 827-5463
Référence fabricant:: 3113
Fabricant:: PR Electronics

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	PR Electronics
	Input Type	Temperature
	Product Type	Temperature Converter
	Output Type	Active Analogue Current and Hart Signal Output
	Minimum Temperature Input	-200°C
	Maximum Temperature Input	1372°C
	Series	3113
	Depth	115mm
	Maximum Supply Voltage	31.2V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	NAMUR NE43, IECEx: KEM 10.0068X, DNV-GL Marine: Stand. f. Certific. No. 2.4, RoHS: 2011/65/EU, ATEX 2014/34/EU: KEMA 10ATEX0147 X, FM: FM17US0004X / FM17CA0003X, NAMUR NE21, LVD: 2014/35/EU, EMC: 2014/30/EU, UL: UL 61010-1, EAC: TR-CU 020/2011
	Hazardous Area Certification	ATEX II 3 G EX nA IIC T4 Gc, Gp. A, B, IECEX: EX nA IIC T4 Gc, EX NA IIC T4, FM Class I, D T4 Or Cl. I, Div 2, Zone 2, AEx nA IIC T4, FM Us: Cl. I, C

	Sélectionner tout
	Marque PR Electronics
	Input Type Temperature
	Product Type Temperature Converter
	Output Type Active Analogue Current and Hart Signal Output
	Minimum Temperature Input -200°C
	Maximum Temperature Input 1372°C
	Series 3113
	Depth 115mm
	Maximum Supply Voltage 31.2V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals NAMUR NE43, IECEx: KEM 10.0068X, DNV-GL Marine: Stand. f. Certific. No. 2.4, RoHS: 2011/65/EU, ATEX 2014/34/EU: KEMA 10ATEX0147 X, FM: FM17US0004X / FM17CA0003X, NAMUR NE21, LVD: 2014/35/EU, EMC: 2014/30/EU, UL: UL 61010-1, EAC: TR-CU 020/2011
	Hazardous Area Certification ATEX II 3 G EX nA IIC T4 Gc, Gp. A, B, IECEX: EX nA IIC T4 Gc, EX NA IIC T4, FM Class I, D T4 Or Cl. I, Div 2, Zone 2, AEx nA IIC T4, FM Us: Cl. I, C

Se connecter pour voir les modèles CAO

Pays d'origine :: DK

3000 Series - Temperature Converter

PR Electronics 3000 series temperature transmitters offer reliable and accurate conversion of industry process temperature signals to analogue or digital outputs. The easy DIP-switch set-up allows for more than 1000 different pre-calibrated temperature range combinations. The 3000 series are compact, fast, and easy to use. With a slim 6 mm housing that offers exceptional performance and EMC immunity for dedicated applications.

Designed and rated to operate between -25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly, for example in control panels mounted in outdoor locations. These transmitters have a low temperature coefficient achieving precise measurements, even when the panel is exposed to wide variations in ambient temperature. You can continue to rely on the output signal, with no need to re-calibrate your device.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges

• All units tested to ensure 2.5 kVAC isolation and have excellent noise immunity

• NAMUR NE21 burst A criteria

• Transmits rapid changes in process measurements to your PLC/DCS for fast and accurate monitoring of critical signals

• Response time of < 30 ms for temperature measurements

• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements

• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

DIP-Switch Programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High Level of Isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device Status Indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over Voltage and Polarity Protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.