Honeywell Technologies HIH-4000 Series, Analogue Output Humidity Sensor, Through Hole Mount, Analogue, ±3.5 %RH, 3-Pin
- N° de stock RS:
- 874-4553
- Numéro d'article Distrelec:
- 173-05-683
- Référence fabricant:
- HIH-4000-002
- Fabricant:
- Honeywell
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 874-4553
- Numéro d'article Distrelec:
- 173-05-683
- Référence fabricant:
- HIH-4000-002
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Humidity Sensor | |
| Output Type | Analogue | |
| Sub Type | Humidity Sensor | |
| Interface Type | Analogue | |
| Accuracy | ±3.5 %RH | |
| Mount Type | Through Hole | |
| Pin Count | 3 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Minimum Supply Voltage | 4V | |
| Maximum Supply Voltage | 5.8V | |
| Package Type | SIP | |
| RH Range | 0 to 100 % | |
| Series | HIH-4000 | |
| Width | 2.03mm | |
| Standards/Approvals | No | |
| Length | 4.17mm | |
| Height | 8.59mm | |
| Sensor Gain | -4mV/°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Humidity Sensor | ||
Output Type Analogue | ||
Sub Type Humidity Sensor | ||
Interface Type Analogue | ||
Accuracy ±3.5 %RH | ||
Mount Type Through Hole | ||
Pin Count 3 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Minimum Supply Voltage 4V | ||
Maximum Supply Voltage 5.8V | ||
Package Type SIP | ||
RH Range 0 to 100 % | ||
Series HIH-4000 | ||
Width 2.03mm | ||
Standards/Approvals No | ||
Length 4.17mm | ||
Height 8.59mm | ||
Sensor Gain -4mV/°C | ||
Automotive Standard No | ||
Honeywell Humidity Sensor, 4.17mm, 3-Pin SIP - HIH-4000-002
This humidity sensor from Honeywell is specifically designed for high-volume original equipment manufacturer (OEM) users. The sensor is frequently installed in equipment that requires strict monitoring of humidity levels, such as sensitive medical equipment or meteorological instruments. It has a moulded thermoset plastic housing, so it's able to withstand light impacts. The sensing element's multilayer construction also provides excellent resistance to moisture as well as oils, dirt, dust and chemicals, making it a good choice for use in harsh environments.
Features & Benefits
• Single in-line package (SIP) type for simple mounting onto printed circuit boards (PCBs)
• Analogue interface for easy pressure readings
• Low current draw of 200μA, making it suitable for low-drain, battery-operated systems
• Wide operating temperature range of -40°C to +85°C for use in a variety of conditions
Applications
• Heating, ventilation and air conditioning (HVAC) equipment
• Medical industry
• Refrigeration equipment
Where on the PCB should I install a humidity sensor?
The humidity sensor should be placed in an area of the PCB that's as far away as possible from any heat-generating components. This reduces the risk of inaccurate readings caused by differences in temperature.
HIH-4000/4020/4021 Series Humidity Sensors, Honeywell
The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA.
Potential Applications:
Refrigeration equipment
HVAC equipment
Medical equipment
Drying
Meteorology
Battery-powered systems
OEM assemblies
Features:
Moulded thermoset plastic housing
Near linear voltage output vs %RH
Laser-trimmed interchangeability
Enhanced accuracy, fast response
Fast response time
Stable, low drift performance
Chemically resistant
Temperature & Humidity Sensors, Honeywell
Liens connexes
- Honeywell Technologies HIH-4000 Series Through Hole Mount ±3.5 %RH, 3-Pin
- Honeywell Technologies Through Hole Mount ±3.5 %RH, 3-Pin SIP
- Honeywell Technologies Surface Mount ±3 %RH, 3-Pin SMD
- Honeywell Technologies Surface Mount ±3 %RH, 3-Pin Surface Mount
- Honeywell Technologies Through Hole Mount ±3.5 %, 3-Pin SIP
- Honeywell Technologies HIH Series Digital Output Temperature & Humidity Sensor Serial-I2C,
- Honeywell Technologies HIH Series Surface Mount ±4.5 %,
- Honeywell Technologies HIH Series Through Hole Mount ±3 %,