Microchip TCN75 Series Temperature, Surface Mount, 2 Wire Serial, 0.5 °C, 8-Pin SOIC
- N° de stock RS:
- 236-8959P
- Référence fabricant:
- TCN75-3.3MOA
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en tube)*
14,36 €
(TVA exclue)
17,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 110 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 10 - 20 | 1,436 € |
| 25 - 45 | 1,324 € |
| 50 - 70 | 1,298 € |
| 75 + | 1,272 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-8959P
- Référence fabricant:
- TCN75-3.3MOA
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Temperature | |
| Interface Type | 2 Wire Serial | |
| Sub Type | Temperature | |
| Accuracy | 0.5 °C | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOIC | |
| Standards/Approvals | RoHS | |
| Height | 1.1mm | |
| Length | 5mm | |
| Series | TCN75 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Temperature | ||
Interface Type 2 Wire Serial | ||
Sub Type Temperature | ||
Accuracy 0.5 °C | ||
Mount Type Surface | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOIC | ||
Standards/Approvals RoHS | ||
Height 1.1mm | ||
Length 5mm | ||
Series TCN75 | ||
Automotive Standard No | ||
The Microchip TCN75 series serially programmable temperature sensor notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device.
Solid state temperature sensing 0.5°C accuracy typical
Operates from -55 °C to +125 °C
Operating supply range 2.7 V to 5.5 V
Programmable trip point and hysteresis with power-up defaults
Standard 2-Wire serial interface
Thermal event alarm output functions as interrupt or comparator/thermostat output
Up to 8 TCN75s may share the same bus
Shutdown mode for low standby power consumption
5V Tolerant I/O at VDD = 3V
Low power 250 micro A typical operating
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01