Microchip TCN75 Series Temperature, Surface Mount, 2 Wire Serial, 0.5 °C, 8-Pin SOIC
- N° de stock RS:
- 236-8958
- Référence fabricant:
- TCN75-3.3MOA
- Fabricant:
- Microchip
Sous-total (1 tube de 100 unités)*
129,60 €
(TVA exclue)
156,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 100 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 100 + | 1,296 € | 129,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-8958
- Référence fabricant:
- TCN75-3.3MOA
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Temperature | |
| Sub Type | Temperature | |
| Interface Type | 2 Wire Serial | |
| Accuracy | 0.5 °C | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOIC | |
| Standards/Approvals | RoHS | |
| Length | 5mm | |
| Height | 1.1mm | |
| Series | TCN75 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Temperature | ||
Sub Type Temperature | ||
Interface Type 2 Wire Serial | ||
Accuracy 0.5 °C | ||
Mount Type Surface | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOIC | ||
Standards/Approvals RoHS | ||
Length 5mm | ||
Height 1.1mm | ||
Series TCN75 | ||
Automotive Standard No | ||
The Microchip TCN75 series serially programmable temperature sensor notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device.
Solid state temperature sensing 0.5°C accuracy typical
Operates from -55 °C to +125 °C
Operating supply range 2.7 V to 5.5 V
Programmable trip point and hysteresis with power-up defaults
Standard 2-Wire serial interface
Thermal event alarm output functions as interrupt or comparator/thermostat output
Up to 8 TCN75s may share the same bus
Shutdown mode for low standby power consumption
5V Tolerant I/O at VDD = 3V
Low power 250 micro A typical operating
Liens connexes
- Microchip TCN75 Series Temperature 2 Wire Serial 8-Pin SOIC
- Microchip Surface Mount Serial-SPI 8-Pin SOIC
- Microchip Surface Mount SMBus 8-Pin SOIC
- Maxim Integrated Surface Mount ±0.5°C, 8-Pin SOIC
- Microchip MCP9801 Series Surface Mount Serial-I2C 8-Pin SOIC
- Microchip MCP9803 Series Surface Mount SMBus 8-Pin SOIC
- Microchip EMC2302 Series Surface Mount 0.5 %, 8-Pin
- Microchip EMC2101 Series Surface Mount 0.5 %, 8-Pin
