STMicroelectronics MCP9701 Series, Digital Output Temperature Sensor, Surface Mount, I2C, 0.5 °C, 6-Pin UDFN
- N° de stock RS:
- 194-7647
- Référence fabricant:
- STTS22HTR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total (1 paquet de 10 unités)*
9,11 €
(TVA exclue)
11,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 mai 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 40 | 0,911 € | 9,11 € |
| 50 - 90 | 0,869 € | 8,69 € |
| 100 - 240 | 0,786 € | 7,86 € |
| 250 - 990 | 0,776 € | 7,76 € |
| 1000 + | 0,767 € | 7,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-7647
- Référence fabricant:
- STTS22HTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Temperature Sensor | |
| Output Type | Digital | |
| Interface Type | I2C | |
| Sub Type | Temperature Sensor | |
| Accuracy | 0.5 °C | |
| Mount Type | Surface | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Minimum Supply Voltage | 1.5V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | UDFN | |
| Series | MCP9701 | |
| Height | 0.55mm | |
| Standards/Approvals | No | |
| Length | 2mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Temperature Sensor | ||
Output Type Digital | ||
Interface Type I2C | ||
Sub Type Temperature Sensor | ||
Accuracy 0.5 °C | ||
Mount Type Surface | ||
Pin Count 6 | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Minimum Supply Voltage 1.5V | ||
Maximum Supply Voltage 3.6V | ||
Package Type UDFN | ||
Series MCP9701 | ||
Height 0.55mm | ||
Standards/Approvals No | ||
Length 2mm | ||
Automotive Standard No | ||
The STTS22H is a band gap temperature sensor coupled with an A/D converter, signal processing logic and an I²C/SMBus 3.0 interface all in a single ASIC. This sensor is housed in a small 2 x 2 x 0.50 mm 6-lead UDFN package with exposed pad down for a better temperature match with the surrounding environment. The STTS22H is factory calibrated and requires no additional calibration efforts on the customer side.
Key features
Integrated high-accuracy temperature sensor
Factory calibrated
One-shot mode for power saving
Electrical specifications
Supply voltage: 1.5 to 3.6 V
I²C, SMBus 3.0 with ALERT (ARA) support
Programmable thresholds with interrupt pin
Supports up to 1 MHz serial clock
Up to 2 I²C/SMBus slave addresses
Ultra-low current: 1.75 μA in one-shot mode
Sensing specifications
Operating temperature -40 °C to +125 °C
Temperature accuracy (max.): ± 0.5 °C (-10 °C to +60 °C)
16-bit temperature data output
Package specifications
UDFN 2.0 x 2.0 x 0.50 mm, 6 leads with exposed pad down
Liens connexes
- STMicroelectronics MCP9701 Series Surface Mount 0.5 °C, 6-Pin UDFN
- Wurth Elektronik Surface Mount ±0.25 %, 6-Pin UDFN
- STMicroelectronics MCP96RL00 Series Surface Mount SMBus
- TE Connectivity Surface Mount ±0.5 %, 6-Pin XDFN
- TE Connectivity Surface Mount ±0.5 %, 8-Pin TDFN
- STMicroelectronics Surface Mount SMBus 8-Pin MSOP
- STMicroelectronics ASM330LHHG1 Series PCB MIPI ±20 mg, 14-Pin
- Analog Devices Surface Mount ±0.5°C, 8-Pin SOIC