Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit

Name: Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit
Brand: Eurotherm
SKU: 790-3619
Price: 1043.76 EUR
Availability: InStock

N° de stock RS:: 790-3619
Référence fabricant:: EPACK-1PH/32A/24V/XXX/V2
Fabricant:: Eurotherm

Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit

Visuel non contractuel

Voir la catégorie

Sous-total (1 unité)*

862,61 €

(TVA exclue)

1 043,76 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité
1 +	862,61 €

*Prix donné à titre indicatif

N° de stock RS:: 790-3619
Référence fabricant:: EPACK-1PH/32A/24V/XXX/V2
Fabricant:: Eurotherm

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Eurotherm
	Output Type	1 NE, De-Energised On Alarm Relay, Alarm Relay
	Product Type	Controller
	Number of Outputs	1
	Maximum Current	63A
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	45°C
	Control Type	Threshold Limit Control (Pa Reduction), True Power Control, Open-Loop Control with Feedforward+Trim, I² Control, Proportional Limit Control (by transfer V²↔I² or P↔I²), V² Control
	Terminal Type	Plug
	Maximum Supply Voltage	500V ac/dc
	Diagnostics	Partial Load Failure, Over-Voltage, Continuous Monitors and Detects Fault Conditions Including Short Circuit
	Energy measurement	Yes
	Auxiliary Power Supply	100 to 500 V
	Digital Comms	Ethernet Dual Port/Modbus TCP
	Firing Mode	Fixed Burst Firing, Variable Burst Firing, Phase Angle, Intelligent Half Cycle
	Maximum Voltage	500V
	Display Type	1.5 in TFT Colour
	Standards/Approvals	CE, GOST-R, IEC 60947-4-3, CCC, cUL, UL
	Length	48mm
	Width	121 mm
	IP Rating	IP20, IP10
	Series	EPack
	Mount Type	DIN Rail
	Input Type	0 to 20 mA, 2 to 10 V, 0 to 10 V, Contact, 4 to 20 mA, One Configurable Analogue Input 0 to 5 V, Digital Input
	Panel Depth	136.2mm

	Sélectionner tout
	Marque Eurotherm
	Output Type 1 NE, De-Energised On Alarm Relay, Alarm Relay
	Product Type Controller
	Number of Outputs 1
	Maximum Current 63A
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 45°C
	Control Type Threshold Limit Control (Pa Reduction), True Power Control, Open-Loop Control with Feedforward+Trim, I² Control, Proportional Limit Control (by transfer V²↔I² or P↔I²), V² Control
	Terminal Type Plug
	Maximum Supply Voltage 500V ac/dc
	Diagnostics Partial Load Failure, Over-Voltage, Continuous Monitors and Detects Fault Conditions Including Short Circuit
	Energy measurement Yes
	Auxiliary Power Supply 100 to 500 V
	Digital Comms Ethernet Dual Port/Modbus TCP
	Firing Mode Fixed Burst Firing, Variable Burst Firing, Phase Angle, Intelligent Half Cycle
	Maximum Voltage 500V
	Display Type 1.5 in TFT Colour
	Standards/Approvals CE, GOST-R, IEC 60947-4-3, CCC, cUL, UL
	Length 48mm
	Width 121 mm
	IP Rating IP20, IP10
	Series EPack
	Mount Type DIN Rail
	Input Type 0 to 20 mA, 2 to 10 V, 0 to 10 V, Contact, 4 to 20 mA, One Configurable Analogue Input 0 to 5 V, Digital Input
	Panel Depth 136.2mm

Se connecter pour voir les modèles CAO

Non conforme

Pays d'origine :: PL

EPack - Compact SCR Power Controller

EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)

24V & 500V versions available

Analogue input signal (voltage and current)

High definition 1.5" TFT display

Configurable via iTools (PC software) or front panel

V², I² or true power control

Energy usage measurement

Advanced load diagnostics

Integrated dual port Ethernet switch for “daisy chained” communications

Plug and play Ethernet communications with Zero configuration networking

Modbus® TCP protocol

Compact DIN Rail and bulkhead Mounting Format

Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit

EPack - Compact SCR Power Controller

Liens connexes