Eurotherm EPACK-3PH DIN Rail Power Controller Relay 500V Power Controller
- N° de stock RS:
- 135-7437
- Référence fabricant:
- EPACK-3PH/32A/500V/XXX/V2/XXX/XXX/TCP
- Fabricant:
- Eurotherm
Sous-total (1 unité)*
1 780,74 €
(TVA exclue)
2 154,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 780,74 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 135-7437
- Référence fabricant:
- EPACK-3PH/32A/500V/XXX/V2/XXX/XXX/TCP
- Fabricant:
- Eurotherm
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eurotherm | |
| Product Type | Power Controller | |
| Output Type | Relay | |
| Maximum Current | 125A | |
| Maximum Operating Temperature | 45°C | |
| Minimum Operating Temperature | 0°C | |
| Control Type | Power Controller | |
| Maximum Supply Voltage | 500V | |
| Auxiliary Power Supply | 100/500 V or 24 V ac/dc | |
| Diagnostics | Yes | |
| Controlled Phases | 3 | |
| Digital Comms | Modbus TCP, Profinet Interface, Ethernet, IP | |
| Maximum Voltage | 500V | |
| Display Type | TFT | |
| Width | 192 mm | |
| IP Rating | IP20 | |
| Standards/Approvals | CE, CAN/CSA C22.2 NO.60947-4-1-14, Regulatory Mark (RCM) Australia, UL60947-4-1, IEC/EN60947-4-3:2014 | |
| Length | 242mm | |
| Input Type | Analogue | |
| Mount Type | DIN Rail | |
| Series | EPACK-3PH | |
| Panel Depth | 219mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eurotherm | ||
Product Type Power Controller | ||
Output Type Relay | ||
Maximum Current 125A | ||
Maximum Operating Temperature 45°C | ||
Minimum Operating Temperature 0°C | ||
Control Type Power Controller | ||
Maximum Supply Voltage 500V | ||
Auxiliary Power Supply 100/500 V or 24 V ac/dc | ||
Diagnostics Yes | ||
Controlled Phases 3 | ||
Digital Comms Modbus TCP, Profinet Interface, Ethernet, IP | ||
Maximum Voltage 500V | ||
Display Type TFT | ||
Width 192 mm | ||
IP Rating IP20 | ||
Standards/Approvals CE, CAN/CSA C22.2 NO.60947-4-1-14, Regulatory Mark (RCM) Australia, UL60947-4-1, IEC/EN60947-4-3:2014 | ||
Length 242mm | ||
Input Type Analogue | ||
Mount Type DIN Rail | ||
Series EPACK-3PH | ||
Panel Depth 219mm | ||
- Pays d'origine :
- PL
EPack Series 3 Phase Power Controllers
EPack Series 3-phase power controllers from Eurotherm are designed to control a wide range of loads in various applications. Even if the loads are unbalanced, the control of each phase ensures complete and accurate control. The power controller has a high level of diagnostics that can be used for alarm management and monitoring for parameters such as impedance, energy counter and reactive power.
Features and Benefits
Nominal load current from 1 Amps to 125 Amps
Voltage up to 500 V
Compact DIN Rail and bulkhead mounting
Configurable via front panel
Plug and plug Ethernet communications with zero configuration networking
Controls a comprehensive range of loads that include; resistive, infrared, transformer, silicon carbide
Energy usage measurement
Advanced load diagnostics
Integrated dual port Ethernet switch for “daisy chained” communications
Modbus TCP, Ethernet/IP or Profinet
Liens connexes
- Eurotherm Power Controller 3 Phase
- Eurotherm Controller 3 Phase
- Eurotherm Power Controller 2 Phase
- Eurotherm Power Controller 500 V Supply Voltage 3 Phase
- Eurotherm Power Controller 24 V Supply Voltage 3 Phase
- Eurotherm Power Controller 500 V Supply Voltage 2 Phase
- Eurotherm DIN Rail Power Controller Analogue, 100 → 500 V ac Supply Voltage
- Littelfuse Through Hole Gas Discharge Tube