Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue

Sous-total (1 unité)*

213,86 €

(TVA exclue)

258,77 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 46 unité(s) prête(s) à être expédiée(s)
  • Plus 43 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +213,86 €

*Prix donné à titre indicatif

N° de stock RS:
125-0691
Numéro d'article Distrelec:
301-65-402
Référence fabricant:
RGC1P23V30ED
Fabricant:
Carlo Gavazzi
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Carlo Gavazzi

Product Type

Power Controller

Output Type

AC

Maximum Current

63A

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Control Type

Analogue

Terminal Type

Screw

Maximum Supply Voltage

250V

Controlled Phases

1

Firing Mode

Soft Starting, X16, X4, Advanced Full Cycle, Phase Angle

Maximum Voltage

660V

Display Type

LED

Length

35.8mm

Standards/Approvals

CSA 22.2 No.14-13, EN50155, EN 60947-4-3, EN61373, RoHS (2011/65/EU), UL508

Width

70mm

IP Rating

IP20

Input Type

Analogue

Series

RGC1P

Mount Type

DIN Rail, Panel

Panel Depth

99mm

Pays d'origine :
MT

Carlo Gavazzi SSR Power Controller


The Carlo Gavazzi RGC1P series SSR power controller has a solid-state contactor supplied with the integrated heatsink. It required analogue input and a current rating of 30A. It is used to control the output power of single-phase loads with an analogue control input. It has selectable switching modes regulated with a knob on the front of the controller. This also allows phase angle control, full-cycle control, advanced full-cycle control, and soft starting. The output of the power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits


100kA short circuit current rating

1-pole analogue switching AC solid-state contactors

2 front LEDs indicate the status of load and control

Control inputs: 4-20 mA, 0V-5V, 1V-5V, 0V-10V, external potentiometer

DIN-rail or panel mounting

Integrated heatsink

Integrated varistor protection on output

Rated operation current up to 63AAC

Rated operational voltage up to 660VAC

Selectable modes of operation are Phase angle, full-cycle x1, x4 or x16, advanced full-cycle specific for short wave infrared heaters and soft starting for limiting inrush current of loads having a high-temperature coefficient

Certifications


CE certified

cULus approved

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.