RS PRO ET2412 Panel Mount On-Off Temperature Controller 1 Input, 2 Output Relay 253V ac On-Off
- N° de stock RS:
- 124-1056
- Numéro d'article Distrelec:
- 304-25-277
- Fabricant:
- RS PRO
Sous-total (1 unité)*
110,15 €
(TVA exclue)
133,28 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 65 unité(s) expédiée(s) à partir du 22 juin 2026
- Plus 16 unité(s) expédiée(s) à partir du 13 juillet 2026
- Plus 16 unité(s) expédiée(s) à partir du 10 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 110,15 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 124-1056
- Numéro d'article Distrelec:
- 304-25-277
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | On-Off Temperature Controller | |
| Output Type | Relay | |
| Number of Inputs | 1 | |
| Number of Outputs | 2 | |
| Maximum Current | 8A | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Control Type | On-Off | |
| Terminal Type | Screw | |
| Maximum Supply Voltage | 253V ac | |
| Display Type | 7 Segment LED | |
| Maximum Voltage | 250V | |
| Length | 77mm | |
| IP Rating | IP65, IP20 | |
| Width | 35mm | |
| Standards/Approvals | EN 60529, IEC 60245, EN 60751, CE marked, IEC 60227, EN 61326-1:2013, EN 61010-1:2010 | |
| Series | ET2412 | |
| Input Type | NTC | |
| Mount Type | Panel Mount | |
| Panel Depth | 61mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type On-Off Temperature Controller | ||
Output Type Relay | ||
Number of Inputs 1 | ||
Number of Outputs 2 | ||
Maximum Current 8A | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Control Type On-Off | ||
Terminal Type Screw | ||
Maximum Supply Voltage 253V ac | ||
Display Type 7 Segment LED | ||
Maximum Voltage 250V | ||
Length 77mm | ||
IP Rating IP65, IP20 | ||
Width 35mm | ||
Standards/Approvals EN 60529, IEC 60245, EN 60751, CE marked, IEC 60227, EN 61326-1:2013, EN 61010-1:2010 | ||
Series ET2412 | ||
Input Type NTC | ||
Mount Type Panel Mount | ||
Panel Depth 61mm | ||
- Pays d'origine :
- TR
RS Pro On/Off Thermostat- 2 Outputs
RS PRO On/off Thermostats are designed for use with NTC Sensors. Fast to install and easy to configure, the thermostats have a large display that provides great visibility in a compact design.
Due to their design and ease of use, the RS PRO thermostats are ideal for use in industrial or commercial applications.
Options available:
1241056 - 230V ac, 2 outputs
1241055 - 24V ac/dc, 2 outputs
Features and Benefits
• 35 x 77 mm size
• On/Off control
• Relay output for cooling or heating control
• Alarm relay
• Single NTC probe input
• Range between -60 ˚C to +150˚C
• Probe failure setting, output status can be set to On, Off or Pulse
• Sensor input offset setting
• Selectable heating or cooling control
• Selectable independent, deviation and band alarm types
• 0000 or 000.0 units displayed
• Temperature units ˚C or ˚F
• CE certified
Typical Applications:
On/Off temperature controllers are designed to control and maintain temperatures in appliances by turning on or off, depending on the users required pre-set temperature. If the temperature drops below the setpoint, the controller will turn on and increase the temperature until it is met. Once the desired temperature is reached, the device output switches off automatically. Temperature controllers are perfect for applications that require temperature control solutions, especially those whereby the temperature increases slowly, and are commonly used in areas such as:
HVAC systems
Ovens
Incubators
Automotive
Storage solutions
FAQs
Why use an On/Off Temperature Controller?
Used for monitoring purposes in heating environments, on-off temperature controllers prevent rapid increases in temperature that could cause damage. These controllers are often used where there isn't a need for precision temperature control, but where a system is unable to handle continuous interruptions. A typical example of an on-off controller is a thermostat in a system, if the temperature drops below the pre-set level the system is switched on. They can protect against a system over-heating or over-cooling and have an 'on' 'off' option with no middle state.
Why RS PRO?
RS PRO is our family brand and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.
Liens connexes
- RS PRO ET2412 Panel Mount On-Off Temperature Controller 1 Input, 2 Output Relay 230V ac/dc On-Off
- RS PRO ET2001 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac On-Off
- RS PRO ET2411 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac On-Off
- RS PRO ET2411 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac/dc On-Off
- RS PRO EDT2423 Panel Mount On-Off Temperature Controller 2 Input, 3 Output Relay 253V ac/dc Controller
- RS PRO RS PRO Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac
- Lumel RE55 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac/dc
- RS PRO Panel Mount On-Off Temperature Controller 1 Input, 2 Output Solid State Relay 253V ac PID Controller