Carel IR33 Panel Mount PID Temperature Controller 2 Input, 2 Output Analogue 230V Auto-tuning PID
- N° de stock RS:
- 121-4225
- Référence fabricant:
- IR33B7LR20
- Fabricant:
- Carel
Sous-total (1 unité)*
170,46 €
(TVA exclue)
206,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 08 juin 2026
- Plus 36 unité(s) expédiée(s) à partir du 08 juin 2026
- Plus 8 unité(s) expédiée(s) à partir du 11 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 170,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 121-4225
- Référence fabricant:
- IR33B7LR20
- Fabricant:
- Carel
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Carel | |
| Output Type | Analogue | |
| Product Type | PID Temperature Controller | |
| Number of Inputs | 2 | |
| Number of Outputs | 2 | |
| Maximum Operating Temperature | 55°C | |
| Minimum Operating Temperature | -10°C | |
| Control Type | Auto-tuning PID | |
| Terminal Type | Plug | |
| Maximum Supply Voltage | 230V | |
| Digital Comms | RS485, Serial | |
| Maximum Voltage | 250V | |
| Display Type | LED | |
| Width | 34.2mm | |
| Standards/Approvals | CE marked (EN61010-1,EN50081-1/50082-1 EMC directives) | |
| Length | 76.2mm | |
| IP Rating | IP10, IP65 | |
| Input Type | Analogue | |
| Mount Type | Panel Mount | |
| Series | IR33 | |
| Panel Depth | 94mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Carel | ||
Output Type Analogue | ||
Product Type PID Temperature Controller | ||
Number of Inputs 2 | ||
Number of Outputs 2 | ||
Maximum Operating Temperature 55°C | ||
Minimum Operating Temperature -10°C | ||
Control Type Auto-tuning PID | ||
Terminal Type Plug | ||
Maximum Supply Voltage 230V | ||
Digital Comms RS485, Serial | ||
Maximum Voltage 250V | ||
Display Type LED | ||
Width 34.2mm | ||
Standards/Approvals CE marked (EN61010-1,EN50081-1/50082-1 EMC directives) | ||
Length 76.2mm | ||
IP Rating IP10, IP65 | ||
Input Type Analogue | ||
Mount Type Panel Mount | ||
Series IR33 | ||
Panel Depth 94mm | ||
- Pays d'origine :
- IT
CAREL Electronic Controller
The CAREL IR33 series electronic temperature controller has a supply voltage rating ranging from 12VAC/DC to 24VAC/DC or 115VAC to 230VAC. This controller has a width of 76.2mm and a height of 34.2mm device. It has 1 relay and 0VDC to 10VDC digital output. This single relay is perfect for controlling the minimum ON or OFF times of output to protect loads. The protection avoids control swings for more consistent and reliable functionality. The controller has a simple user interface with a clear LED screen and large control buttons.
Auto tuning
Auto tuning within the controller gives vital accuracy during configuration. The auto-tune function uses rule-based calculations typically used by experienced engineers to configure the controller either at the set-point or whilst the load is being heated from the ambient temperature.
Supplied with a default factory setting, the PID parameters allow standard control and functionality but are not optimised for the system that IR33 will control. Auto-tuning the controller is used to fine-tune the 3 control parameters involved to ensure that the controller is optimised for any application.
Real-time clock
The addition of a real-time clock (RTC) to the IR33 series aids in the management of working cycles within the controller as well as to support logging alarms. The RTC in the controller is a low power resource for accurate timekeeping and freeing up system power for accurate monitoring and control.
Working cycles controlled by the IR33 can rely on the internal clock for accuracy with the ability to remain timekeeping even when the main system power source is off or unavailable.
Real-time clocks are key to an accuracy within time-based controllers and should not be confused with hardware clocks governing digital information. Real-time clocks, unlike hardware clocks, count in human time units for relative control.
Optional expansion
Suitable for use with remote controls, the IR33 series can use an infrared remote control allowing access to all main functions as well for configuring system parameters. This allows easy setup and use of all IR33 controllers from a distance.
Find the IRTRUES000 IR33 remote control here: 745-7999
Programming keys are a simple and effective way to quickly program controllers both when on and also when not connected to a power supply. This disconnected programming function can reduce the risk of errors in the controller. A programming key allows for fast and effective technical service and can be used in just a few seconds for ease.
Find the IROPZKEY00 programming key here: 745-8002
Features and Benefits
2 independent control loops
Auto-tuning PID control
Infrared receiver and buzzer
Plug-in terminals
Programming key compatibility
Real-time clock
Relay or SSR output versions
Remote control option
Temperature input or universal input
Certifications
CE certified
IP10 rated
IP65 rated
Liens connexes
- Carel IR33 Panel Mount PID Temperature Controller 4 Input Digital 230V ac PID
- Carel IR33 Panel Mount PID Temperature Controller 2 Input, 4 Output Relay 230V PID Controller
- Carel IR33 Panel Mount PID Temperature Controller, 4 Output SSR 30V ac Temperature Control
- Carel IR33 Panel Mount PID Temperature Controller 2 Input, 2 Output Relay 230V ac/dc PID Controller
- Carel IR33 On-Off Temperature Controller
- Carel IR33 Panel Mount PID Temperature Controller 2 Input, 4 Output SSR 24V ac/dc Temperature Control
- Carel IR33-DN33 Universal Panel Mount PID Temperature Controller 2 Input, 2 Output Relay 230V
- Carel IR33 Panel Mount PID Temperature Controller 2 Input, 4 Output Digital 230V ac On-Off