CAL 9900 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, 115 V ac Supply Voltage
- N° de stock RS:
- 354-919
- Référence fabricant:
- 991.11C
- Fabricant:
- CAL
Sous-total (1 unité)*
614,07 €
(TVA exclue)
743,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 3 unité(s) expédiée(s) à partir du 08 décembre 2025
- Plus 3 unité(s) expédiée(s) à partir du 22 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 614,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 354-919
- Référence fabricant:
- 991.11C
- Fabricant:
- CAL
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | CAL | |
| Output Type | Relay | |
| Supply Voltage | 115 V ac | |
| Size | 48 x 48 (1/16 DIN)mm | |
| Number of Outputs | 2 | |
| Temperature Range | -200 → +1800 °C | |
| Display Type | LED | |
| IP Rating | IP54 | |
| Series | 9900 | |
| Range | CAL 9900 | |
| Panel Depth | 115mm | |
| Sélectionner tout | ||
|---|---|---|
Marque CAL | ||
Output Type Relay | ||
Supply Voltage 115 V ac | ||
Size 48 x 48 (1/16 DIN)mm | ||
Number of Outputs 2 | ||
Temperature Range -200 → +1800 °C | ||
Display Type LED | ||
IP Rating IP54 | ||
Series 9900 | ||
Range CAL 9900 | ||
Panel Depth 115mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
CAL 9900 Temperature Controller
The CAL 9900 series PID temperature controller is a microcontroller based unit for precise control with easy installation, suitable for support both heating and cooling applications. PID controllers offer proportional control over basic on/off controls allowing for a far more versatile and application friendly process control.
The 9900 series from CAL offer push to tune as well as auto tuning algorithms for fast accurate set up with the ability to tune all five control parameters automatically. The auto tune function within the controller allows the unit to tune during warm up. Alternatively, the Push-to-Tune function within the controller allows for tuning in more difficult applications. This allows tuning to be achieved even when the thermal conditions are substantially different.
Built in standard 1/16 DIN size, the 9900 series PID controllers are easy to mount in any DIN system and are suitable for use with DIN adapters to fit 1/8 and 1/4 DIN units. Along with its industry standard dimensions, the 9900 series are all IP54 rated suitable for use in areas with average levels of dust as well as being protected from water spray from any direction.
The four large control buttons teamed with the units large LED display make for an easy to use, easy to install and easy to commission unit offering reliability as well as easy in almost any application.
The 9900 series from CAL offer push to tune as well as auto tuning algorithms for fast accurate set up with the ability to tune all five control parameters automatically. The auto tune function within the controller allows the unit to tune during warm up. Alternatively, the Push-to-Tune function within the controller allows for tuning in more difficult applications. This allows tuning to be achieved even when the thermal conditions are substantially different.
Built in standard 1/16 DIN size, the 9900 series PID controllers are easy to mount in any DIN system and are suitable for use with DIN adapters to fit 1/8 and 1/4 DIN units. Along with its industry standard dimensions, the 9900 series are all IP54 rated suitable for use in areas with average levels of dust as well as being protected from water spray from any direction.
The four large control buttons teamed with the units large LED display make for an easy to use, easy to install and easy to commission unit offering reliability as well as easy in almost any application.
• 1/16 DIN (48 x 48mm) unit for easy installation
• Application versatility with heat-cool strategy
• Auto-tune or Push-to-tune at setpoint
• 5A output relay on main control output
• Dual output versions can plug into 11-pin base
• Application versatility with heat-cool strategy
• Auto-tune or Push-to-tune at setpoint
• 5A output relay on main control output
• Dual output versions can plug into 11-pin base
The 991.12C features two relay outputs and uses a 230 V ac power supply.
CAL Temperature Controllers
Liens connexes
- CAL 9900 PID Temperature Controller 2 Output SSD, 115 V ac Supply Voltage
- CAL 9900 PID Temperature Controller 2 Output Relay 115 V ac Supply Voltage
- CAL 9900 PID Temperature Controller 2 Output SSD, 230 V ac Supply Voltage
- CAL 9900 PID Temperature Controller 2 Output Relay, 230 V ac Supply Voltage
- CAL 9900 PID Temperature Controller 2 Output Relay 230 V ac Supply Voltage
- CAL 9500 PID Temperature Controller 2 Output Relay, 100 → 240 V ac Supply Voltage
- CAL 9300 PID Temperature Controller 2 Output Relay 240 V ac Supply Voltage
- CAL 9500 PID Temperature Controller 2 Output Relay 240 V ac Supply Voltage