Jumo 701170 Panel Mount Controller 1 Input 240V ac Controller
- N° de stock RS:
- 279-055
- Référence fabricant:
- 701170/8-0153-1001-23/005,000
- Fabricant:
- Jumo
Indisponible
RS n'aura plus ce produit en stock.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
510,59 €
(TVA exclue)
617,81 €
(TVA incluse)
- N° de stock RS:
- 279-055
- Référence fabricant:
- 701170/8-0153-1001-23/005,000
- Fabricant:
- Jumo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Jumo | |
| Product Type | Controller | |
| Number of Inputs | 1 | |
| Maximum Current | 20mA | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 55°C | |
| Terminal Type | Plug-in Screw Terminal | |
| Control Type | Controller | |
| Maximum Supply Voltage | 240V ac | |
| Display Type | LED | |
| Maximum Voltage | 400V | |
| IP Rating | IP65, IP20 | |
| Standards/Approvals | DIN EN 14597, DIN EN 60529, DIN EN 60730-2-9, DIN EN 61326 | |
| Input Type | Analogue | |
| Mount Type | Panel Mount | |
| Series | 701170 | |
| Sélectionner tout | ||
|---|---|---|
Marque Jumo | ||
Product Type Controller | ||
Number of Inputs 1 | ||
Maximum Current 20mA | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 55°C | ||
Terminal Type Plug-in Screw Terminal | ||
Control Type Controller | ||
Maximum Supply Voltage 240V ac | ||
Display Type LED | ||
Maximum Voltage 400V | ||
IP Rating IP65, IP20 | ||
Standards/Approvals DIN EN 14597, DIN EN 60529, DIN EN 60730-2-9, DIN EN 61326 | ||
Input Type Analogue | ||
Mount Type Panel Mount | ||
Series 701170 | ||
- Pays d'origine :
- DE
The Jumo Freely Programmable Temperature Limiter according to DIN EN 14597 in format 48 x 96 mm is made for a voltage supply range of AC 110 to 240 V, 48 to 63 Hz, 5 VA. The measurement input is freely configurable for RTD temperature probe, thermocouples, current and voltage signal. The available analogue output provides a standards signal. Temperature limiter, -monitor watch thermal processes in systems on a set limit value. If this exceed, the integrated relay (with fuse cut-out) switch the system into a safe operating status. When the system gets back to the valid range, on the temperature limiter operation the button Reset needs to be pressed. Configured as an temperature monitor it reset on it's own. The relay KV with a adjustable temperature dispense a pre-alarm signal before the set limit value is archieved. The device is designed for the panel mounting and is wired with pluggable screw terminal with a conductor cross section of max. 2.5 mm².
Green LED OK expire and the LED K1 lights red
Switching status is also shown on the LED KV
Liens connexes
- Jumo 701170 Panel Mount Controller 1 Input 30V dc Controller
- Jumo 701170 Panel Mount Controller 110 → 240 V ac Supply Voltage Controller
- Jumo 701170 Panel Mount Controller 20 → 30 V dc Supply Voltage Controller
- Jumo safetyM TB/TW 08 Panel Temperature Limiter 2 Input, 2 Output Relay 240V On-Off
- Jumo Panel Temperature Limiter 1 Input, 2 Output 2 Relay 240V ac/dc On-Off
- Jumo Panel PID Temperature Controller 1 Input, 5 Output Relay 240V Controller
- Jumo JUMO Quantrol Panel Mount PID Controller 1 Input, 1 Output Relay 240V ac PID Controller
- Jumo LC100 Panel PID Temperature Controller 2 Input, 2 Output Relay 240V PID Controller