Eaton 2A British Standard Fuse, E1, 240V

Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

• The low-temperature rise enables the fuse to be suitable for high-density mounting
• Fuse links, specifically designed for the protection of equipment
• Conforms to industry standards
• Low voltage fuse
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS 88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

This British Standard Fuse is intended for low-voltage applications requiring effective protection. The Eaton model adheres to BS 88 and IEC 269 standards for safety and compliance. With dimensions of 47mm in length and a diameter of 12mm, this fuse plays a crucial role in various electrical systems, featuring a current rating of 2A and a voltage rating of 240V.

• High rupture capacity for enhanced safety in fault conditions
• Compliance with BS 88 and IEC 269 for regulatory assurance
• Compact size facilitating straightforward installation in a variety of circuits
• Compatible with SC20 safeclip fuse holders
• gG classification effective for overload protection
• Weighs 11.6g, minimising impact on circuit design

• Suitable for domestic and commercial electrical installations
• Protects low-voltage circuits from overloads
• Applicable in industrial settings requiring fuse protection
• Used in automation systems for equipment safeguarding
• Commonly applied in electronics to prevent circuit damage

Yes, it is rated for 240V use.

Yes, it has a gG rating, ideal for overload scenarios.

Yes, it meets BS 88 and IEC 269 requirements.

Yes, it is designed for both industrial and commercial use.

It works with SC20 safeclip fuse holders.

Eaton formerly known as Bussmann