Infineon System-On-Chip 24-Pin TSDSO-24

Bénéficiez d'une remise sur les achats en gros

Ajoutez 50 de plus pour économiser 6,00 €

Consulter les options de prix de gros

Sous-total 20 unités (conditionné en bande continue)*

40,30 €

(TVA exclue)

48,76 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 2 888 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
Économie
20 - 482,015 €-
50 - 981,895 €6,00 €
100 - 1981,75 €26,50 €
200 +1,645 €74,00 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
244-2898P
Référence fabricant:
TLE94613ESXUMA1
Fabricant:
Infineon
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Infineon

Product Type

System-On-Chip

Mount Type

Surface

Package Type

TSDSO-24

Pin Count

24

Interface Type

LIN, CAN

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

28V

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

150°C

Height

3.9mm

Series

TLE9461-3ES

Width

950μm

Standards/Approvals

ISO 11898-2:2016, RoHS

Length

8.65mm

Automotive Standard

AEC-Q101, AEC-Q100

The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.

Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04

Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance

Universal High-Voltage Wake Input for voltage level monitoring and wake detection

General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch

HIgh-Voltage Measurement Function as alternate pin assignment

Fail Outputs for Fail-Safe signalization

Configurable wake-up sources

Reset Output & Interrupt Output

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.